MIYOTA 6P73 Analog Multi-Hand Quartz Watch Instruction Manual

MIYOTA 6P73 Analog Multi-Hand Quartz Watch

Product Information: Cal. 6P73 Analog Multi-Hand Quartz Watch

The Cal. 6P73 is an analog multi-hand quartz watch that comes with a date and 24-hour feature. The watch has four hands, including the hour hand, minute hand, second hand, and a 24-hour hand.

Features

• Analog display
• Multi-hand quartz watch
• Date feature
• 24-hour feature

Display

The watch has four hands, including the hour hand, minute hand, second hand, and a 24-hour hand. The normal crown position displays the hour hand, minute hand, and second hand. The 24-hour hand is displayed in the 2nd position of the normal crown position. The date and minute hand are displayed in the 1st position of the normal crown position.

Operation Procedure

The Cal. 6P73 watch has two setting procedures:

1. Setting the time (hour, 24-hour, minute, and second)
2. Setting the date

Setting the Time

The hour, 24-hour, minute, and second are set by the same operation procedure. Follow the below steps to set the time:

1. Pull the crown out to the 2nd position.
2. Rotate the crown clockwise or counterclockwise to set the desired time.
3. When the day changes over, it is a.m. (Day changes over between 0:00a.m. and 5:30a.m. or little later). Check am./p.m. by the 24-hour hand.
4. Push the crown back to its original position.

Setting the Date

Follow the below steps to set the date:

1. Pull the crown out to the 1st position.
2. Rotate the crown counterclockwise to set the date quickly.
3. Note: Do not set the date between the hours 9:00p.m. and 0:30a.m. The date may not change correctly the next day.
4. Push the crown back to its original position.

Cal. 6P73 Instruction manual

FEATURES

ANALOG MULTI-HAND QUARTZ WATCH WITH DATE AND 24HOUR

• DISPLAY
• OPERATION PROCEDURE
• SETTING THE TIME (HOUR, 24 HOUR, MINUTE, SECOND)
• SETTING THE DATE (BY QUICK OPERATION)

DISPLAY

OPERATION PROCEDURE

1. SETTING THE TIME (HOUR, 24HOUR, MINUTE and SECOND)
2. SETTING THE DATE

SETTING THE TIME (HOUR, 24 HOUR, MINUTE AND SECOND)
The hour, 24 hour, minute and second are set by the same operation.

SETTING PROCEDURE

Pull the crown out to the 2nd position to stop the second hand at 0 (12 o’clock).
Turn the hour/minute hands in a clockwise direction to set the time.
To ensure time is set accurately, first turn the minute hand 5 minutes ahead of desired time and then turn back (in a counterclockwise) to the desired time.
After setting the time, use a time signal to synchronize the watch by pushing crown to the normal position to start the second hand going.

NOTE: Make sure you have correctly set AM/PM before setting the time.
When the day changes over, it is a.m.. (Day changes over between 0:00a.m. and 5:30a.m. or little later) Check am./p.m. by the 24hour hand.

SETTING THE DATE (BY QUICK OPERATION)
Pull the crown out to the 1st position. Turn the crown counterclockwise to set the date quickly.

NOTE:

• Do not set the date between the hours 9:00p.m. and 0:30a.m..The date may not change correctly the next day.
  These specifications might be changed without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>