BRESSER 9075100 Digital Night Vision Instruction Manual

: June 6, 2024
: BRESSER

BRESSER 9075100 Digital Night Vision

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

|

MANUAL DOWNLOAD:

---|---

| WARRANTY & SERVICE:
---|---

About this Instruction Manual

Please read the safety instructions and the operating instructions carefully before use.

Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/user of the product.

Gene ral Warning

DANGER!
Children should only use the device under adult supervision. Keep packaging material, like plastic bags and rubber bands, out of the reach of children, as these materials pose a choking hazard.

Do not expose the device to high temperatures. Excessive heat or improper handling could trigger a short-circuit, a fire or an explosion.

FIRE RISK!
Do not place the device, particularly the lenses, in direct sunlight. The concentration of light could cause a fire.

RISK of ELECTRIC SHOCK!
This device contains electronic components that operate via a power source. Children should only use the device under adult supervision. Only use the device as described in the manual; otherwise, you run the risk of an electric shock. of other people. Do not use them to look into apartments, for example.

NOTE!
Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary.

Privacy PROTECTION!
The night vision device is intended only for private use. Please heed the privacy of other people. Do not use them to look into apartments, for example.

NOTES on Cleaning

Before cleaning the device, disconnect it from the power supply! Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do not use any cleaning fluid. Clean the eyepieces and/or lenses only with a soft, lint-free cloth, (e.g. microfibre cloth). To avoid scratching the lenses, use only gentle pressure with the cleaning cloth. Protect the device from dust and moisture.

EC DECLARATION OF CONFORMITY

Bresser GmbH has issued a ,,Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/9075100/CE/9075100_CE.pdf

UKCA DECLARATION OF CONFORMITY

Bresser GmbH has issued a ,,Declaration of Conformity” in accordance with applicable guidelines and corresponding standards. The full text of the UKCA declaration of conformity is available at the following internet address: www.bresser.de/download/9075100/UKCA/9075100_UKCA.pdf

Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6Hf, UK

DISPOSAL

Dispose of the packaging materials properly, according to their type, such as paper or cardboard. Contact your local waste-disposal service or environmental authority for information on the proper disposal.

Do not dispose of electronic devices in the household garbage!
As per Directive 2002/96/EC of the European Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in an environmentally friendly manner.

Scope of delivery

Night vision device
Bag, Strap
Instruction manual

Install batteries

Open the battery cover.
Put in 4x AA Alkaline batteries.
When inserting the batteries pay attention to the correct polarity + and –.
Close the battery cover.

Insert micro SD/TF memory card (for photo and video taking)

Insert the card in the direction as shown. Push the card into the slot to lock it.
To remove the card, push it in to release. When the card is partially ejected, pull it out.
To format the card, press the mode button several times to reach the menu, and select ,,Format SD”.

Lid ON for day use

Important:
Lid OFF for night use

Overview

Front

Back

Parts overview

① Focus Wheel|
---|---
② A/V Port|
③ USB Port
④ TF/SD card slot
⑤ ZOOM| When in Video or Photo mode: Press ZOOM to zoom in at multiple levels (1.5X, 2X). Once reaching 2X, press ZOOM one more time to go back to normal. The binocu- lars have a magnification of 3.5X. The maximum digital zoom is 2X. So the maximum magnification is 7X.
When in Playback mode: Press the ZOOM button to open the delete menu of the current file.
When in Menu mode: Press the ZOOM to go up.
⑥ IR button| Press IR for 4 levels of brightness (0/1/2/3) when using the binoculars at night.
When in Playback mode: Press IR to playback the next file.
When in Menu mode: Press IR to go down.
⑦ MODE button|

There are 4 modes: Video / Photo / Playback / Menu (in a loop)
When the power is on, the default mode is video
Press the mode button to change to the next mode.

⑧ SNAP button

| When in Video mode: Press the button to start video recording, press again to stop recording.
When in Photo mode: Press the button to take photos.
When in Playback mode: Press the button to playback the selected item.
⑨ POWER button| Long press for power on and off
⑩ LCD Screen| Look inside the LCD Screen and target the object you would like to view.
⑪ IR FILTER| Protection lid must be taken off for night use.
⑫ IR LENS
⑬ TRIPOD ADAPTER| Mounting fixture for e.g. a tripod or head mount (tripod or head mount not included).
⑭ BATTERY COVER| 4x AA batteries required
⑮ Hooks for carrying strap

Capturing a video

When the power is on, the night vision device starts automatically in the video mode.
If the Mode icon is not showing, press the MODE button multiple times until the icon shows up.
Adjust the focus by turning the focus wheel.
During low light conditions or at night, adjust the brightness by pressing IR.
Press the SNAP button to start recording videos. Press the button again to stop the recording.

Capturing a photo

Press the MODE button until you enter the Photo Mode.
If the Mode icon is not showing, press the MODE button multiple times until the icon shows up.
Adjust the focus by turning the focus wheel.
During low light conditions or at night, adjust the brightness by pressing IR.
Press the SNAP button to take pictures.

Playback

Press the MODE button until you enter the Playback Mode.
The LCD screen will show the last file saved. If the file was a photo it will show, if it was a video it will show .
Press the IR button to go to the next file.
Press the SNAP button to playback the video file.
Press the ZOOM button to open the delete menu for the currently seleted file. Press IR to go down or ZOOM to go up. Press SNAP to confirm.

Display Information

You can make changes to settings in the Menu mode. Press the MODE button several times until you are in the Menu mode. Press the IR button to go down the menu, or press the ZOOM button to go up. Press the SNAP button to enter. Once the desired setting is selected, press the SNAP button again to save it. Press the MODE button to exit back to Video Mode.

Format

Yes| To delete all the files on the microSD/TF card
No| Cancel format
Auto Power Of
1Minute| Auto power off in 1 minute without action
3Minutes| Auto power off in 3 mins without action
5Minutes| Auto power off in 5 mins without action
No| No auto power off (Default setting)
TV Mode| The video output mode can be set to NTSC (North America) or PAL (Europe)
50 Hz| Default setting for EU
60 Hz| Default setting for U.S. and Japan
Backlight| To select the brightness level of the LCD screen 4 levels of brightness (1/2/3/4).
Language| Select one of the available languages
Date/Time| Select Date/Time on or off. Set the Date and Time (YY/MM/DD)
Version| Display firmware version

Troubleshooting

Poor Image:

If you wear reading glasses or varifocals, make sure you keep a minimum distance of 20-30 cm from the screen.
If at day, make sure the protection lid is on. If at night, make sure the protection lid is off.
Adjust the focus by slowing turning the Focus wheel at the front bottom of the binocular. Make sure it is focused.

YOUR PURCHASE HAS PURPOSE

WHEN YOU SHOP WITH US, YOU HELP FURTHER T HE WORK OF OUR SC IENTISTS, EXPLORERS, AND EDUCATORS AROUND THE WORLD.

To learn more, visit natgeo.com/info

© National Geographic Partners LLC. All rights reserved.
NATIONAL GEOGRAPHIC and Yellow Border Design are trademarks of National Geographic Society, used under license.
Visit our website: www.nationalgeographic.com

Bresser GmbH
Gutenbergstraße 2
46414 Rhede · Germany
www.bresser.de

Bresser UK Ltd.
Suite 3G, Eden House
Enterprise Way, Edenbridge,
Kent TN8 6Hf, Great Britain