HENDI 239230 Induction Cooker Model 2000 User Manual

INDUCTION COOKER MODEL 2000
239230

You should read this user manual carefully before using the appliance.
Keep these instructions with the appliance.
For indoor use only.
Dear Customer,
Thank you for purchasing this Hendi appliance. Read this manual carefully, paying particular attention to the safety regulations outlined below, before installing and using this appliance for the first time.

Safety regulations

• This appliance is intended for buffet and household use.
•  Only use the appliance for the intended purpose it was designed for as described in this manual.
•  The manufacturer is not liable for any damage caused by incorrect operation and improper use.
• Keep the appliance and electrical plug away from water and other liquids. In the event, the appliance falls into water, immediately remove the power plug from the socket. Do not use the appliance until it has been checked by a certified technician. Failure to follow these instructions will cause life-threatening risks.
•  Never attempt to open the housing of the appliance by yourself.
• Do not insert objects into the housing of the appliance.
• Do not touch the plug with wet or damp hands.
• The danger of electric shock! Do not attempt to repair the appliance by yourself, repairs are only to be conducted by qualified personnel.
• Never use a damaged appliance! When it’s damaged, disconnect the appliance from the socket and contact the retailer.
• Warning! Do not immerse the electrical parts of the appliance in water or other liquids.
• Never hold the appliance under running water.
•  Regularly check the power plug and cord for any damage. When damaged it must be replaced by a service agent or similarly qualified person in order to avoid danger or injury.
•  Make sure the cord does not come in contact with sharp or hot objects and keep it away from open fire. Never pull the power cord to unplug it from the socket, always pull the plug instead.
•  Make sure that the power cord and/or extension cord do not cause a trip hazard.
•  Never leave the appliance unattended during use.
• Warning! As long as the plug is in the socket the appliance is connected to the power source.
•  Turn off the appliance before unplugging it from the socket.
• Connect the power plug to an easily accessible electrical socket so that in case of emergency the appliance can be unplugged immediately.
•  Never carry the appliance by the cord.
•  Do not use any extra devices that are not supplied together with the appliance.
• Only connect the appliance to an electrical outlet with the voltage and frequency mentioned on the appliance label.
•  Never use accessories other than those recommended by the manufacturer. Failure to do so could pose a safety risk to the user and could damage the appliance. Only use original parts and accessories.
• This appliance should not be operated by persons with reduced physical, sensory or mental capabilities, or persons that have a lack of experience and knowledge.
• This appliance should, under any circumstances, not be used by children.
•  Keep the appliance and its power cord out of reach of children.
• WARNING: ALWAYS switch off the appliance and unplug from the power socket before cleaning, maintenance, or storage.

Special safety regulations

• Caution! Make sure the cord does not come in contact with hot components while using the appliance.
• Do not install the appliance near objects and appliances that may be affected by a magnetic field, like, e.g., TVs, radios, bank cards and credit cards.
• Maintain a minimum clearance of 15 cm around the appliance for ventilation.
• Never leave any metal objects on the appliance.
• Never switch on the appliance with an empty pan on top of it, as this may result in serious damage to the appliance.
• Make sure the appliance is not set up near water vapor or greasy vapors. The fan of the appliance will take in these vapors and this will cause grease or moisture to accumulate in the appliance which may result in a short-circuit in the appliance. Clean the grease filter regularly.
•  This appliance is classified as protection class II.

Intended use

• This appliance is intended for buffet and household use.
• The appliance is designed only for cooking a variety of food via heating the suitable cookware. Any other use may lead to damage to the appliance or personal injury.
•  Operating the appliance for any other purpose shall be deemed as a misuse of the device. The user shall be solely liable for improper use of the device.

Preparations before using for the first time

• Check to make sure the appliance is undamaged. In case of any damage, contact your supplier immediately and do NOT use the appliance.
• Remove all the packing material.
• Clean the appliance with lukewarm water and a soft cloth.
• Level the appliance.
• Make sure that a clearance of 15 cm is maintained around the appliance with respect to the ventilation of the appliance.
• Position the appliance in such a way that the plug is accessible at all times.
•  Keep the packaging so you can properly store the appliance when it is not used for an extended period of time.

**Control panel

**

1. ON/OFF key
2. Timer key
3. Up arrow key
4. Digital display| 5. Down arrow key
6. Power key
7. Temperature key
---|---

Power levels

[when the user keeps pressing the increase icon, it increases in a rapid pace]

Temperature range

Suitable cooking equipment

| Suitable| Not suitable
---|---|---
Bottom of cookware| Flat bottom

| Curved, uneven, rounded bottom

Material| Cookware with iron, cast iron, magnetic stain- less steel or enameled iron bottom.| Cookware with ceramic, glass, copper, bronze, or aluminum bottom.
Diameter of the bottom| Between 12 cm and 26 cm.| Less than 12 cm or more than 26 cm.
Type of cookware| Cookware with a bottom thickness over 1.5 mm.| Completely closed containers or cans.

Note: Using a pan or pot that’s not suitable for induction cooking may damage the appliance.

Operating the appliance

• Put the plugin the socket

• Set the pan of your choice on the cooking surface, bearing the above-mentioned instructions in mind.
  Note! Do not leave your pan on the appliance while empty as this may lead to damage to your pan.

• Switch the appliance on by pressing the “ON/OFF key” and either the temperature key  or power key to activate the appliance.
  If your pan is suitable for induction and has a bottom diameter of 12cm, at minimum, the appliance will go into operation.
  If you have pressed the power key, the appliance will enter in capacity mode operation and you will recognize this from the fact that the fan will go on and the display will show a capacity position of “100”.

On the other hand, if you have pressed the temperature key, the appliance will enter temperature mode the operation, the default temperature is 100ºC. Note! If the appliance beeps after being switched on, the pan you are using is not suitable for induction or
the appliance is defective. In case of any doubt, always contact the supplier of your pan!
Once the appliance is operating, it enters the Capacity mode by default, and the display indicates the position “100”, you can program the appliance in one of the following ways.

Capacity mode: You can control the performance of the appliance, just as for a gas cooker via 11 positions ranging from 100W to 2000W.

Temperature mode: you can set the temperature between 35ºC and 240ºC in 5ºC increments. Standard position for the appliance is 100ºC.
NOTE: if we keep pressing the arrow keys, the SET temperature increases at a fast speed.
Attention! The programmed temperature is that of the glass plate and not the temperature in the pan!

• Capacity mode: If you choose the capacity mode, press the “Power key”, the lighting of the “Power key” will be switched on. Default Capacity is 100W. Now you can program the capacity required by means of the arrow keys &, with 2000W being the highest and 100W the lowest position.
•  Temperature Mode: If you select the temperature mode, press the “Temperature Key” , the lighting of the “Temperature key” will be switched on. Default Set Temperature is 100°C. Now you can program the required temperature by means of the arrow keys & , the lowest temperature is 35ºC and 240ºC the highest, temperature division is 5ºC.
• Timer setting: After programming the power or temperature, you can opt to program the timer, this timer switches the appliance off after the programmed time has been reached. You can do this by pressing the “Timer key” once after programming the power or temperature, the lighting of the “Timer key” will be switched on.

You can now set the desired time. The maximum programmable time is 180 minutes.

• From 0 – 10 minutes, the time adjusted interval is 1 minute for each increment and 30 seconds for each decrement.
• From 10 – 60 minutes, the time adjusted interval is 5 minutes for each increment and 1 minute for each decrement.
• From 60 – 180 minutes, the time adjusted interval is 10 minutes for each increment and 5 minutes for each decrement.
• Switch OFF the appliance : Once you have reached the required result, you can switch off the appliance by pressing the “ON/OFF key” . The “Digital display”  will go off and the lighting of the control keys will go off.

• If you do not use the appliance for an extended period, remove the plug from the wall-mounted electrical socket and remove the pans from the appliance.
  NOTE! Allow the appliance to cool off before you touch it. The glass plate is very hot after use.

Cleaning and maintenance

•  Always remove the plug from the socket before cleaning the appliance.

•  Beware: Never immerse the appliance in water or any other liquid!

•  Clean the outside of the appliance with a damp cloth (water with mild detergent).

•  Never use aggressive cleaning agents or abrasives.
  Do not use any sharp or pointed objects.  Do not use petrol or solvents! Clean with a damp cloth and detergent if necessary. Do not use abrasive materials.

•  Clean the fan openings with the vacuum cleaner.

•  Clean the glass plate each time after use. This is to prevent any residues from burning onto the glass plate.

•  For daily cleaning of the glass, special detergent should be used

Troubleshooting

the ventilation slot and any ob­struction such as a wall or other appliances. Unplug, let the appliance cool down, plug back in, and switch ON the appliance. Check and clean the air inlet and outlet if they are blocked.
E02| The temperature of the pan is too high. If the pan is dry or empty it can reach a very high temperature. The appliance will shut down to protect the internal parts.| Remove the cookware from the appliance. Let the appliance cool off.
E03| Input voltage is too high or too low.| Make sure the appliance is connected to the correct input voltage.

Technical specification

Item no.: 239230
Operating voltage and frequency: 220 – 240V~ 50/60 Hz
Dimension: 296x370x(H)46mm
Rated input power: 2000W
Protection class: Class II

Remark: Technical specification is subjected to change without prior notification.

Warranty
Any defect affecting the functionality of the appliance which becomes apparent within one year after purchase will be repaired by free repair or replacement provided the appliance has been used and maintained in accordance with the instructions and has not been abused or misused in any way. Your statutory rights are not affected. If the appliance is claimed under warranty, a state where and when it was purchased and include proof of purchase (e.g. receipt).
In line with our policy of continuous product development, we reserve the right to change the product, packaging and
documentation specifications without notice.

Discarding & Environment
When decommissioning the appliance, the product must not be disposed of with other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a  designated collection point. Failure to
follow this rule may be penalized in accordance with applicable regulations on waste disposal. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste for recycling, please contact your local waste collection company. The manufacturers and importers do not take responsibility for recycling, treatment, and ecological disposal, either directly or through a public system.

Hendi B.V.
Innovatielaan 6
6745 XW De Klomp, The Netherlands
Tel: +31 317 681 040
Email: info@hendi.eu

– Changes, printing and typesetting errors reserved.
© 2021 Hendi B.V. De Klomp – The Netherlands

References

• hendi.com
• Welkom - HENDI Tools for Chefs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>