niko 353-701111 Motion Detector Instruction Manual
- June 3, 2024
- niko
Table of Contents
niko 353-701111 Motion Detector
Motion detector M42LR, 230 V, 1 channel, 32-37 m, 360°, SnapFit, for flush mounting
Wiring
Remove if you want to use the contact as a dry contact (potential-free).
This product must be secured with a miniature circuit breaker (MCB) of max. 16
A in the electrical cabinet. The MCB rating is limited by national
installation rules.
Dimensions
Installation
App settings
| | | __
---|---|---|---
Factory settings| Switch ON/OFF| 500 lux| 15 min
LED behaviour
Green LED continuous on| | Connection OK|
---|---|---|---
Green LED breathing| | Connection OK, overrule ON|
Green LED flashing| | Warming up| Wait
Red LED continuous on| | Error| More info – >
detector tool
Red LED breathing| | Warning
Blue LED flashing| | Walk test active
Specifications
- Article number: 353-701111
- Configuration: 230 V Master
- Input voltage: 230 Vac ± 10 %, 50 Hz
- Maximum power consumption: 0.2 W
- Circuit breaker maximum MCB rating: 16 A*
- Relay contact NO: (max. µ10 A), potential-free
- Maximum load incandescent and halogen lamps (cosφ = 1): 2300 W
- Maximum load fluorescent lamps (cosφ ≥ 0.5): 1200 VA
- Maximum load economy lamps (CFLi): 350 W
- Maximum load LED lamps: 230 V 350 W
- Maximum load LED driver: 500 VA
- Maximum load electronic transformer: 500 VA
- Maximum capacitive load: 140 µF
- Maximum switching current : 165 A/20 ms or 800 A/200 µs
- Light intensity range: 20 – 2000 lux, ∞
- Number of channels: 1 channel
- Switch-off delay pulse,: 15 s – 120 min, ∞
- Hysteresis on light intensity : + 10%
- Detection angle: 360°
- Detection range (PIR): Ø 37 m from a height of 3 m
- Ambient temperature: -25 – +40 °C
- Mounting method flush mounting with SnapFit: mounting bracket
- Mounting height: 2 – 3.5 m
- Drill diameter: 76 mm
- Minimum flush mounting depth: 56.9 mm
- Colour white: (RAL 9010)
- Dimensions visible : (HxWxD) 100 x 100 x 42.2 mm
- Dimensions (HxWxD): 120 x 120 x 99.1 mm
- Wire capacity: 1.5/2.5 mm²
- Maximum range Bluetooth®: (free field, depending on the device) 50 m
- Operating frequency: 2.4 GHz
- Maximum radio frequency power: – 2 dBm
- Protection degree: IP20
- Impact resistance: IK04
- Modification of settings app (iOS/Android) and 2-way Bluetooth®: communication
- Halogen-free: yes
- Marking: CE
Detection area
Troubleshooting
| Problem | Possible cause | Proposed solution |
|---|---|---|
| Load does not turn on | The wiring is not correct | Check |
the wiring scheme
| The ambient light is too strong| Check the response value luminosity and
raise the value if necessary
Load does not turn off| The switch-off delay is too
long| Check the switch-off delay and shorten the delay if necessary
| The detector receives false triggers| Check for any objects that may cause
false triggering and remove them from the detection range or lower the
sensitivity
App cannot connect to the detector| Bluetooth® has been
disa- bled on your mobile device| Enable Bluetooth®on your mobile device
Support & contact
+32 3 778 90 80
support@niko.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>