Hoover CleanSlate Pet Carpet & Upholstery Spot Cleaner Visit User Guide
- June 7, 2024
- Hoover
Table of Contents
Hoover CleanSlate Pet Carpet & Upholstery Spot Cleaner Visit User Guide
GETTING STARTED
-
Remove Solution Tank from the unit.
-
Add cleaning formula to Solution Tank using the ratio chart in manual and included measuring cup.
-
Slide tank back into the unit. Unwrap hose from unit and attach preferred tool.
HOW TO USE
-
Spray a generous amount of cleaning formula over stain by pressing the trigger behind the tool
Spray -
Scrub the stain in a back and forth motion until you see bubbles.
**Scrub
**
- Apply downward pressure on the front of the cleaning tool and pull towards you to lift the stain. Repeat as needed.
**Suction
**
TOOLS FOR EVERY MESS
7in WidePath Tool
Tackle stairs and larger messes in fewer passes.
Tight Spot Tool
Clean crevices, corners, baseboards and other tough to reach areas
Hose Rinse Tool
Flush the hose with water to remove any left behind dirt & debris after use
PRO TIPS
FOR BEST EXPERIENCE: Use formula ratio chart in manual when filling solution tank. Add water before formula.
FOR BEST PERFORMANCE: Empty the tank, flush the hose, and rinse the tools after each use.
WHEN FULL, THERE WILL BE A CHANGE IN OPERATING SOUND: Empty recovery tank promptly
SCAN HERE
For more information on CleanSlate™ or to view this guide in other languages,
scan the QR code.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>