evo-lite Ingress Protection Rating User Guide

May 15, 2024
evo-lite

evo-lite-LOGO

evo-lite Ingress Protection Rating

evo-lite-Ingress-Protection-Rating-PRODUCT

Specifications

Ingress Protection Rating Guide

About These Ratings: An Ingress Protection (IP) Rating is an industry- standard method of classifying the effectiveness of electrical enclosures in blocking foreign bodies such as dust, moisture, liquids, and accidental contact.

Testing Limitations: It is essential to understand that testing for ingress protection is performed under laboratory conditions and limited time frames. Testing will never fully simulate every real-world situation. All IP ratings are standard benchmarks established under and relevant to the tested metrics.

Product Usage Instructions

Solids Protection

evo-lite-Ingress-Protection-Rating-1

  • 0 – Not protected
  • 1 – Protected against a solid object greater than 50mm, such as a hand
  • 2 – Protected against a solid object greater than 12mm, such as a finger
  • 3 – Protected against a solid object greater than 2.5mm, such as a screwdriver
  • 4 – Protected against a solid object greater than 1mm, such as most screws or wires
  • 5 – Dust protected. Limited ingress of dust, will not interfere with operation
  • 6 – Dust tight. No ingress of dust

Liquids Protection

evo-lite-Ingress-Protection-Rating-2

  • 0 – Not protected
  • 1 – Protected against vertically falling drops of water for 10 minutes at a rate of 1mm/min
  • 2 – Protected against vertically falling drops of water for 10 minutes at a rate of 3mm/min
  • 3 – Protected against spraying water up to 60 degrees from vertical at 0.7LPM at 80-100kPa
  • 4 – Protected against splashes of water from all directions for 5 minutes at 10LPM at 80-100kPa
  • 5 – Protected against a 6.3mm water nozzle for 3 minutes at 12.5LPM at 30kPa at a distance of 3 meters
  • 6 – Protected against a 12.5mm water nozzle for 3 minutes at 100LPM at 100kPa at a distance of 3 meters
  • 7 – Protected against temporary immersion up to 1 meter for 30 minutes
  • 8 – Protected against continuous submersion for long periods at a depth of 3 meters

FAQ

What does an IP rating tell me about the product?

An IP rating indicates how well the product is protected against solids like dust and liquids like water based on standardized tests.

How do I know which IP rating is suitable for my needs?

Determine the environmental conditions your product will be exposed to and choose an IP rating that provides adequate protection against those conditions. For example, if your product will be used outdoors where it may encounter rain or dust, a higher IP rating for both solids and liquids protection would be recommended.

Can I modify the product to improve its IP rating?

No, altering the product may void its warranty and compromise its original design integrity. It is recommended to select a product with the appropriate IP rating for your specific use case.

WWW.EVO-LITE.COM
INFO@EVO-LITE.COM 
1-888-887-2980
© EVO-LITE, LLC
6240 W 54TH AVE., ARVADA, CO 80002
V1–2423

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals