airlive ISFP-LR-10G-10KM 10G Multi Giga SFP+MiniGBIC Transceiver User Guide

Industrial Level 10G Multi Giga SFP+ MiniGBIC
Transceiver, Up to 10KM, Hot-pluggable, Auto-fill back
ISFP-LR-10G-10KM

Overview

The AirLive ISFP-LR-10G-10KM is a low-power, high-performance, and cost- effective single-mode Industrial level SFP+ Fiber transceiver for serial optical data communication applications up to 10Gbps and 10KM in Industrial environments. The low jitter and high sensitivity module is intended for multi-mode dual fiber and operates at a nominal wavelength of 1310nm, the higher operating temperature of -40°C ~ +85°C makes the module ideally suited for Industrial and higher temperature areas, the module is hot-pluggable.
The transceiver incorporates TX Disable control, TX-Fault, and RX_LOS monitor functions. It is a duplex LC connector transceiver designed to work on Multi- Gigabit Ethernet applications and to provide IEEE802.3ae compliant link and Class I Laser safety compliant link.
The suitable applications such as High-speed storage area networks, computer cluster cross-connect, customized high-speed data pipes, and more.

Features

• 10Gbps Fiber Mini GBIC SFP+ Transceiver
• Single-mode SFP+ fiber
• Duplex LC connector Interface
• Wavelength 1310nm DFB Laser and PIN photo detector
• 10Gbps high speed
• Distance up to 10KM

|

• Low Power consumption < 1.0W
• Hot-pluggable capability
• Very low EMI
• Excellent ESD protection
• Compatible with SFF8472
• Operating Temperature：-40°C ~ +85°C

---|---

Application

• Fiber Channel Infrastructure
• STM-16 Optical Interface

|

• ATM Switches and Routers
• SDH/SONET Switch Infrastructure

---|---
Application Environment examples

• Bank
• AirPort
• Hotel
• Expressway

|

• Petrochemical Industry
• Metro
• Factory

Transmitter Operating Characteristic Optical, Electrical

Transmitter

Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λc| 1290| 1310| 1330| nm
Sid-Mode Suppression Ratio| SMSR| 35|

–

|

–

| dB
Average Output Power| Po| -5| –| +0.5| dBm
Extinction Ratio| Er| 3.5| | | dB
Dispersion Penalty| | | | 3.2| dB
Relative Intensity Noise| RIN12OMA| | | -128| dB/Hz
Total jitter| Tj| | | 215| PS
Input Differential Impendence| Zin| 90| 100| 110| Ohm
Data Input Swing Differential| Vin| 180| | 700| mV
TX Disable – Disable| | 2.0| | Vcc| V
TX Disable – Enable| | 0| | 0.8| V
TX Fault – Assert| | 2.0| | Vcc| V
TX Fault — De-Assert| | 0| | 0.8| V

Receiver Operating Characteristic Optical, Electrical

Receiver

Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λc| | 1310| | nm
Receiver Sensitivity| Rsen|

–

|

–

| -13| dBm
Receiver Overload| Rov| | | -12| dBm
Return Loss| | -3| | | dB
LOS Assert| LOSA| -28| | | dBm
LOS De-Assert| LOSD| | | -14| dBm
LOS Hysteresis| | 0.5| | 4|
Output differential impendence| Zout|

–

| 100|

–

| Ohm
Data Input Swing Differential| Vout| 300|

–

| 800| mV
Rx LOS – Assert|

–

| 2.0|

–

| Vcc| V
Rx LOS — De-Assert|

–

| 0|

–

| 0.8| V

Industrial level Fiber for Long Distance up to 10Km, 10Gbps, auto- fallback

Extend the network further with the AirLive network switches and fiber modules. Use the Industrial SFP+ modules in the SFP+ ports which also
supports DDM and offers more information about the fiber connection and makes it easier to find any faults or bad connections.

Specification

Hardware

• Power Supply Voltage
  3.15V~3.45V
  Typical Power Supply Voltage: 3.3V

• Standard
  Compliant with IEEE 802.3ae
  Compliant with Digital Diagnostic SFF-8472
  Compliant with IEC-60825
  DDM Support
  ESD Protection

• Total Supply Current:
  300mA

• Data Rate:
  103125 Mbps

• Power Dissipation
  Max 1.0 W

• Transmitter (Electrical – Optical)
  Centre Wavelength:
  – Min.:1290nm
  – Typical: 1310nm
  – Max.: 1330nm
  Average Output Power Min -5 ~ +0.5dBm
  Extinction Ratio: 3.5dB
  Operating Data Rate: 10Gbps
  Tx Input Differential. Voltage:
  – Min. 180 Mv
  – Max. 700 mV
  Tx Fault Output Voltage – Assert:
  – Min. 2.0V
  – Max. Vcc
  Tx Fault Output Voltage – De-Assert:
  – Min. 0V
  – Max. 0.8V

• Receiver -Optical, Electrical
  Center Wavelength:
  – Typical 1310nm
  Receive Sensitivity In Average Power:
  – Max. -13dBm
  Los Assert: -12dB
  Los De-Assert: -28dBm
  Los Hysteresis
  – Min. 0.5
  – Max. 4
  Overload: -12dBm
  Data Input Swing Differential Voltage
  – Min. 180mV
  – Max. 700mV

| Environment

• Operating Temperature:
  -40°C to +85°C

• Storage Temperature:
  -40°C to +85°C

• Working Humidity:
  0%~85%, non-condensing

Standard package of SFP

• Package size:
  TBD mm(LWH)

• Package Weight:
  N.W: TBD kgs; G.W:TBD KGS

• Package content:
  1 x SFP Module

Standard carton package

• Quantity:
  10 pcs / 1 Blister

• Dimensions
  5.8×1.3×0.9 cm

• Weight
  TBD kgs

Ordering Information

• Model:
  ISFP-LR-10G-10KM

• Name:
  10Gbps Fiber Mini GBIC ISFP+ Transceiver,
  1310nm, LC connector, 10KM, hot-pluggable

• Specification will be changed without prior notice

 www.airlive.com
AirLive Technology Corporation
4F., NO. 132, LN. 235, BAOQIAO RD.,
XINDIAN DIST., NEW TAIPEI CITY 231407,
TAIWAN

References

• wifi6 MESH Router|AirLive|Managed Switch|5G|Your best choice of Smart Network Solution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>