airlive 10G Multi Giga SFP + MiniGBIC Transceiver User Guide
- June 7, 2024
- airlive
Table of Contents
airlive 10G Multi Giga SFP + MiniGBIC Transceiver
Overview
The AirLive SFP-SR-10G-300M is a low power, high performance and cost- effective multi mode SFP Fiber transceiver for serial optical data communication applications up to 10Gbps and 300M. The low jitter and high sensitivity module is intended for single mode dual fiber and operates at a nominal wavelength of 850nm, the operating temperature 0°C~70°C and the module is hot pluggable.
The transceiver incorporates TX Disable control, TX-Fault, and RX_LOS monitor functions. It is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE802.3ae compliant link and Class I Laser safety compliant link.
The suitable applications are such as High-speed storage area networks, computer cluster cross-connect, customized high-speed data pipes, and more.
Features
- 10Gbps Fiber Mini GBIC SFP+ Transceiver
- Multi mode SFP+ fiber
- Duplex LC connector Interface
- Wavelength 850nm VCSEL Laser and PIN photo detector
- 10Gbps high speed
- Distance up to 300M
- Low Power consumption < 1.0W
- Hot-pluggable capability
- Very low EMI
- Excellent ESD protection
- IEEE802.3ae
- Operating Temperature：0 °C ~ +70 °C
Application
- Fiber Channel Infrastructure
- STM-16 Optical Interface
- ATM Switches and Routers
- SDH/SONET Switch Infrastructure
Application Environment examples
- Bank
- AirPort
- Hotel
- Expressway
- Petrochemical Industry
- Metro
- Factory
Transmitter Operating Characteristic Optical, Electrical
Transmitter
Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λC| 840| 850| 860| nm
Spectral width (RMS)| Dl| –| –| 0.45| nm
Average Output Power| Po| -5| –| 0| dBm
Extinction Ratio| Er| 3.0| –| | dB
Dispersion Penalty| | | | 3.9| dB
Relative Intensity Noise| RIN12OMA| | | -128| dB/Hz
Total jitter| Tj| | | 215| PS
Input Differential Impendence| Zin| 90| 100| 110| Ohm
Data Input Swing Differential| Vin| 180| | 700| mV
TX Disable – Disable| | 2.0| | Vcc| V
TX Disable – Enable| | 0| | 0.8| V
TX Fault – Assert| | 2.0| | Vcc| V
TX Fault – De-Assert| | 0| | 0.8| V
Receiver Operating Characteristic Optical, Electrical
Receiver
Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| λC| | 850| | nm
Receiver Sensitivity| Rsen| –| –| -11.5| dBm
Receiver Overload| Rov| | | -10.5| dBm
Return Loss| | 0| | | dB
LOS Assert| LOSA| 12| | | dB
LOS De-Assert| LOSD| -25| | | dBm
LOS Hysteresis| | 0.5| | |
Output differential impendence| Zout| –| 100| –| Ohm
Data Input Swing Differential| Vout| 300| –| 800| mV
Rx_LOS – Assert| –| 2.0| –| Vcc| V
Rx_LOS – De-Assert| –| 0| –| 0.8| V
Fiber for Long Distance up to 300m
Extend the network further with the AirLive network switches and fiber modules. Use the SFP+ modules in the SFP+ ports which also supports DDM and offers more information about the fiber connection and makes it easier to find any faults or bad connections.
Specification
| Model | AirLive SFP-SR-10G-300M |
|---|
Hardware
• Power Supply Voltage:
3.15V~3.45V
Typical Power Supply Voltage: 3.3V
• Standard
Compliant with IEEE 802.3ae
Compliant with Digital Diagnostic SFF-8472 Compliant with IEC-60825
DDM Support ESD Protection
• Total Supply Current:
300mA
• Data Rate : 10 Gbps
• Power Dissipation
Max 1.0 W
• Transmitter (Electrical – Optical)
Centre Wavelength:
– Min.:840nm
– Typical: 850nm
– Max.: 860nm
Average Output Power: -5, Max -0dBm Extinction Ratio: Min: 3.0dB
Operating Data Rate: 10Gbps Tx Input Differential. Voltage:
– Min. 180 Mv
– Max. 700 mV
Tx Fault Output Voltage – Assert:
– Min. 2.0V
– Max. Vcc
Tx Fault Output Voltage – De-Assert:
– Min. 0V
– Max. 0.8V
• Receiver -Optical, Electrical
Center Wavelength:
– Typical 850nm
Receive Sensitivity In Average Power:
– Max. -11.5dBm Los Assert: 12dB
Los De-Assert: -25dBm Los Hysteresis
– Min. 0.5
Receiver Overload: -10.5dBm
Data Input Swing Differential Voltage
– Min. 180mV
– Max. 700mV
| Environment
• Operating Temperature: 0°C to +70°C
• Storage Temperature: -40°C to +85°C
• Working Humidity : 5%~95%, non-condensing
Standard package of SFP
• Package size:
TBD mm(LWH)
• Package Weight:
N.W: TBD kgs; G.W:TBD KGS
• Package content : 1 x SFP Module
Standard carton package
• Quantity: 10 pcs / 1 Blister
• Dimensions
5.8×1.3×0.9 cm
• Weight TBD kgs
Ordering Information
• Model: SFP-SR-10G-300M
• Name:
10Gbps Fiber Mini GBIC SFP+ Transceiver, 850nm, LC connector, 300M, hot- pluggable
Specification will be changed without prior notice
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>