airlive Industrial Level 10G Multi Giga SFP + MiniGBIC Transceiver User Guide

**airlive Industrial Level 10G Multi Giga SFP + MiniGBIC Transceiver User Guide

**

Overview

The AirLive ISFP-SR-10G-300M is a low power, high performance and cost- effective single mode Industrial level SFP+ Fiber transceiver for serial optical data communication applications up to 10Gbps and 300M in Industrial environments. The low jitter and high sensitivity module is intended for multi mode dual fiber and operates at a nominal wavelength of 850nm, the higher operating temperature from -40°C ~ +85°C makes the module ideally suited for Industrial and higher temperature areas, the module is hot pluggable.

The transceiver incorporates TX Disable control, TX-Fault, and RX_LOS monitor functions. It is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE802.3ae compliant link and Class I Laser safety compliant link.

The suitable applications are such as High-speed storage area networks, computer cluster cross-connect, customized high-speed data pipes, and more.

Features

• 10Gbps Fiber Mini GBIC SFP+ Transceiver
• Multi mode SFP+ fiber
• Duplex LC connector Interface
• Wavelength 850nm VCSEL Laser and PIN photo detector
• 10Gbps high speed
• Distance up to 300M
• Low Power consumption < 1.0W
• Hot-pluggable capability
• Very low EMI
• Excellent ESD protection
• IEEE802.3ae
• Operating Temperature: -40°C ~ +85°C

Application

• Fiber Channel Infrastructure
• STM-16 Optical Interface
• ATM Switches and Routers
• SDH/SONET Switch Infrastructure

Application Environment examples

• Bank
• AirPort
• Hotel
• Expressway
• Petrochemical Industry
• Metro
• Factory

Transmitter Operating Characteristic Optical, Electrical

Transmitter| | | | |
---|---|---|---|---|---
Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| Xc| 840| 850| 860| nm
Spectral width (RMS)| AA.| | | 0.45| nm
Average Output Power| Po| -5| | 0| dBm
Extinction Ratio| Er| 3.0| | | dB
Dispersion Penalty Relative Intensity Noise| | | | 4.| dB
dB/Hz
R I N120MA| | | -128
Total jitter| Tj| | | 215| PS
Input Differential Impendence| Zin| 90| 100| 110| Ohm
Data Input Swing Differential| Vin| 180| | 700| mV
TX Disable – Disable| | 2.0
0| | Vcc| V
TX Disable – Enable| | | 0.8| V
TX Fault – Assert| | 2.0| | Vcc| V
TX Fault — De-Assert| | 0| | 0.8| V

Receiver Operating Characteristic Optical, Electrical

Receiver| | | | |
---|---|---|---|---|---
Parameter| Symbol| Min.| Typical| Max.| Unit
Centre Wavelength| xc| | 850| | nm
Receiver Sensitivity| Rsen| | | -12.| dBm
Receiver Overload| Roy| | | -11.| dBm
Return Loss LOS Assert| | 0| | | dB
LOSA| 12| | | dB
LOS De-Assert| LOSD| -25| | | dBm
LOS Hysteresis| | 0.5| | |
Output differential impendence| Zout| | 100| | Ohm
Data Input Swing Differential| Vout| 300| | 800| mV
Rx_LOS – Assert| | 2.0| | Vcc| V
Rx_LOS — De-Assert| | 0| | 0.8| V

Fiber for Long Distance up to 300m

Extend the network further with the AirLive network switches and fiber modules. Use the SFP+ modules in the SFP+ ports which also supports DDM and offers more information about the fiber connection and makes it easier to find any faults or bad connections.

Specification

Model

Hardware

• Power Supply Voltage

  • 3.15V~3.45V
  • Typical Power Supply Voltage: 3.3V

• Standard

  • Compliant with IEEE 802.3ae
  • Compliant with Digital Diagnostic SFF-8472
  • Compliant with IEC-60825
  • DDM Support
  • ESD Protection

• Total Supply Current:

  • 300mA

• Data Rate

  • 10 Gbps

• Power Dissipation

  • Max 1.0 W

• Transmitter (Electrical – Optical)
  Centre Wavelength:

  • Min.:840nm
  • Typical: 850nm
  • Max.: 860nm

• Average Output Power: -5, Max -0dBm
  Extinction Ratio: Min: 3.0dB
  Operating Data Rate: 10Gbps
  Tx Input Differential. Voltage:
  

  • Min. 180 Mv

  • Max. 700 mV
    Tx Fault Output Voltage – Assert:

  • – Min. 2.0V

  • – Max. Vcc

• Receiver -Optical, Electrical
  Center Wavelength:

  • Typical 850nm
    Receive Sensitivity In Average Power:

  • Max. -11.5dBm
    Los Assert: 12dB
    Los De-Assert: -25dBm
    Los Hysteresis

  • Min. 0.5

• Receiver Overload: -10.5dBm Data Input Swing Differential Voltage

  • Min. 180mV
  • Max. 700mV

AirLive ISFP-SX-10G-300M

Environment

• Operating Temperature: -40°C to +85°C
• Storage Temperature: -40°C to +85°C
• Working Humidity: 5%~95%, non-condensing

Standard package of SFP

• Package size: TBD mm(LWH)
• Package Weight: N.W: TBD kgs; G.W:TBD KGS
• Package content: 1 x SFP Module

Standard carton package

• Quantity: 10 pcs / 1 Blister
• Dimensions 5.5×1.3×0.8 cm
• Weight TBD kgs

Ordering Information

• Model: ISFP-SR-10G-300M
• Name: Industrial level 10Gbps Fiber Mini GBIC ISFP Transceiver, 850nm, LC connector, 300M, hotpluggable

Qualities:

Industrial Level 10G Multi Giga SFP+ MiniGBIC Transceiver, Transceiver, Up to 300M, Hot pluggable, Auto-fall back ISFP-SR-10G-300M

• 10G SFP+ transceiver
• 850nm
• Up to 300M
• Multi Mode Dual Fiber
• Industrial-level
• LC Duplex Connector
• DDM Function
• ESD Protection
• Hot Pluggable
• -40°C~+85°C

References

• wifi6 MESH Router|AirLive|Managed Switch|5G|Your best choice of Smart Network Solution

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>