airlive INJ-1G-30W-1248 INJ-1G-30W-1248 PoE Injector User Manual
- June 7, 2024
- airlive
Table of Contents
INJ-1G-30W-1248
User Manual
Copyright & Disclaimer
No part of this publication may be reproduced in any form or by any means, whether electronic, mechanical, photocopying, or recording without the written consent of AirLive Technology Corp.
AirLive Technology Corp has made the best effort to ensure the accuracy of the
information in this user’s guide. However, we are not liable for the
inaccuracies or errors in this guide.
Please use with caution. All information is subject to change without notice
All Trademarks are properties of their respective holders.
Disposal
| This marking indicates that this product should not be disposed of with
other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmentally safe recycling.
---|---
Overview
The AirLive INJ-1G-30W-1248 Industrial PoE+ injector supports one RJ45 Gigabit port for data in and one RJ45 Gigabit Ethernet PoE port for transmitting data and power over one Cat.5e or above cable up to 100meter. To reliably work in a critical industrial environment, it is equipped with industrial-grade components, compliant with 802.3at PoE+ for supporting PoE power up to 30W, providing a wide range voltage of 12~48Vdc power input, supporting wide operation temperature range -40C°~ 80C°, and protected by a rugged strong aluminum housing. Thanks to all the high standard requirements, it can operate reliably and efficiently in the most available applications.
Connecting the Switch
Setup the INJ-1G-30W-1248 PoE Injector, connect the Ethernet port of the injector to a LAN switch with a network cable. Connect the PoE Out port to the PoE device After the device is powered on, the PWR indicator will all be on. If the indicators are not on, check the power supply connection.
| Indicator | Color | Status | Description |
|---|---|---|---|
| PWR | Green | ON | Powered on |
| PoE | Green | ON | PoE is activated. |
| Blinking | A Power Device (PD) is being detected. | ||
| OFF | No device is connected or the connected device is not a PD. |
Installing DIN Rail and Wall Mount
DIN Rail Installation.
- Tighten the screws to fix the DIN Rail plate.
- Lock the upper part of the DIN Rail clip on the upper side of the track. Gently press it until the clip is securely locked on the track.
Wall Mount Installation.
- Tighten the screws to fix the Wall Mount plate.
- Mount the Switch on the wall or on a flat surface with 2 screws piercing through the mounting holes to secure it in position.
For more detailed specifications please see the datasheet.
The datasheet can be found online on www.airlive.com
** Specifications are subject to change and improvement without notice.
AirLive INJ-1G-30W-1248 User Manual
References
- wifi6 MESH Router|AirLive|Managed Switch|5G|Your best choice of Smart Network Solution
- wifi6 MESH Router|AirLive|Managed Switch|5G|Your best choice of Smart Network Solution
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>