Munters IceDry 1400 Dehumidification Units User Guide
- June 7, 2024
- Munters
Table of Contents
PRODUCT SHEET
Munters IceDry®140 Desiccant dehumidification units for a frost-free storage
Frost-free cold storage can be a reality with the installation of an IceDry dehumidifier. When an IceDry unit is installed, accumulated ice and frost will be significantly reduced or eliminated.
Features
- Thermostat controlled heating fan within the electrical panel
- Special reactivation fan in an insulated fan box with a heating cable
- Reversible panel construction (provides installation flexibility)
IceDry is the only dehumidifier that has been developed especially for
installation inside cold storage areas. The tough, cold environment demands
special features created to ensure reliable and energy-efficient operation of
the unit.
Installation of the unit is simple. The IceDry unit is placed close to a wall
and ducting around the unit is minimal. Reactivation air is taken from the
room next to the cold storage area. Immediately after being started, the unit
will begin to reduce ice and frost.
Unique benefits of the IceDry unit include:
- Reduced electrical and mechanical failures, less downtime
- Lower maintenance costs
- Reduced defrost requirements
- Increased efficiency of evaporators
Suggested specification guide
The dehumidifier shall be of the non-cycling sorption type with a single
desiccant rotary structure. The unit will be equipped with an internally
sealed rotor unit. The rotor casing shall be constructed of durable thermoset
plastic and contain isolated sections that will provide a precise balance for
dehumidification, reactivation, and heat recovery airflows. The metal frame
and access panels shall be constructed from corrosion-resistant ALUZINK ®. A
suitable access panel shall allow access for inspection or servicing without
disconnecting ducting or electrical wiring.
The rotary structure shall be a monolithic fabricated extended surface
consisting of inert silicates reinforced with uniform diameter glass fibers
for maximum strength. The fabricated structure shall be smooth and continuous
in the direction of airflow without interruptions or sandwich layers that
restrict airflow or create a leakage path at joining surfaces. Desiccants
shall not channel, cake or fracture due to repeated temperature and moisture
cycling. The materials of construction shall be nontoxic and NFPA 225-ASTM
E84 compliant.
Full face contact pressure seals shall be provided to separate the process and
reactivation airstreams and eliminate detrimental leakage of air or moisture
with static pressure differentials of up to 3″ of water gauge.
Dehumidifier shall be factory-assembled, fully automatic, complete with
HoneyCombe ® desiccant wheel, reactivation heaters, reactivation energy
control system, roughing filters, motors, fans, non-ratcheting desiccant drive
unit, automatic controller, and all components’ auxiliaries. Reactivation
Energy Modulation shall be stepless solid-state proportioning type.
Dehumidifier shall be functionally tested at the manufacturer’s factory and
shipped complete with all components necessary to maintain the normal
operation.
*Continual engineering and research for product improvement may result in design and specification changes. Consult the factory for certified technical data.
**Technical Specifications***
Process Volume: 825 scfm
Maximum Reactivation Volume: 225 scfm
Maximum FLA:
24.4A @ 230V/3/60Hz
13.2A @ 460V/3/60Hz
Maximum noise level unducted (dBA): 80
30% process and reactivation filters
Fan External Static Pressure (in. w.g.):
Process: 1.0
Reactivation: 0.5
Performance:
For Process Inlet Temperature ≤10°F
Process Outlet Moisture = 0.6 gr/lb
Process Temperature Rise is 16°F
For performance ≥10°F, consult the factory.
| Max length (in.) | 34 |
|---|---|
| Max width (in.) | 24 |
| Max height (in.) | 60 |
| Max weight (lbs.) | 350 |
Find your nearest Munters office at www.munters.com
Munters reserves the right to make alterations to specifications, quantities,
etc., for production or other reasons, subsequent to publication. © Munters
AB, 2021
References
- Industrial Dehumidifier & Dehumidification Systems Manufacturer | Munters
- Industrial Dehumidifier & Dehumidification Systems Manufacturer | Munters
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>