ANKER B2524 Charger Fast Instruction Manual

: June 7, 2024
: Anker

Table of Contents

ANKER B2524 Charger Fast Instruction Manual
Important Safety Instructions
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER B2524 Charger Fast Instruction Manual

ANKER B2524 Charger Fast - LED Indicator

Using an ultra-thick protective phone case or a case with a magnetic/iron plate is not recommended as it may affect the wireless charging function.
Do not place any foreign objects between your smartphone and the wireless charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, as it may cause overheating.
Do not connect the wireless charger to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function.

Important Safety Instructions

Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature during use of this product must not exceed 40°C.
Open flame sources, such as candles, must not be placed on this product.
Only use a dry cloth or brush to clean this product.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference. to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with
minimum distance of 20 cm between the radiator & your body.
Product Name: Power Wave Stand
Model: A2524
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
Telephone: +1 (909) 484 1530

IC Statement

This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

Specifications

ANKER B2524 Charger Fast - Specifications

Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2524 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address: https://www.anker.com

GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2524 is in compliance with Radio Equipment Regulations 2017. The full text of the GB
declaration of conformity is available at the following internet address:
https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom

Indoor icon

This product should not be disposed of with normal waste. It must be recycled.

18-month limited warranty