anko 43030521 MONITOR CLIP LIGHT User Manual
- June 7, 2024
- Anko
Table of Contents
User Manual
MONITOR CLIP LIGHT
43030521
Notice:
Please read user manual carefully before any operations and keep it for your
records.
Technical data:
Rated working voltage and current: DC5V/1A
Lamp rated power: 4.5W
Adjustment of light mode: Capacitive touch switches, Stepless dimming
Timing shutdown: Intelligent timing shutdown
Optical light sensor
Light control: Light control automatically adjusts brightness
Light Source: light-emitting diode
Light switch mode: normal—cool —warm
Colour temperature: 3000K/4000K/5000K
Maximum illuminance: ≥380LUX(LED lamp measured vertical to 35CM away from the
table)
Packaging content:
1. USB cable 1. 2. Instruction manual 1
Product illustration:
Instruction
-
Connect the micro USB cable to the power input port, and the other end of the cable to any device with a 5V, 1A USB output.
-
Lamp ON/OFF button :
Touch to turn on the lamp, and touch again to turn it off; to adjust the brightness of the LED light, hold down on/off button. -
Light mode switch button M :
Touch to switch light mode: normal-cool-warm -
Timer/brightness auto adjustment button :
Short touch to activate the optical light sensor so that the brightness will be adjusted automatically. The red indicator is turned ON. To deactivate the optical light sensor, short touch again, the red indicator will turn OFF.
Hold down to activate the timer function. The lamp will flash 2 times when activated. The light will turn off automatically after 40 minutes.
Cautions
- This product is for indoor use only.
- This product might be turned on or off under strong electromagnetic wave.
- The light source in this lamp shall be replaced by the manufacturer or its service agent or someone with similar qualifications.
- When the moving part of the product is stretched to the limited position, don’t pulled strongly to avoid damage.
- The light-controlled sensor head cannot be blocked to avoid affecting the automatic dimming function.
- Suggest to adjust the light mode to normal or warm at night.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.Kmart will provide you with
your choice of a refund, repair or exchange (where possible) for this product
if it becomes defective within the warranty period. Kmart will bear the
reasonable expense of claiming the warranty. This warranty will no longer
apply where the defect is a result of alteration, accident, misuse, abuse or
neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>