dji MATRICE 300 RTK Upward Gimbal Connector Instructions
- June 7, 2024
- DJi
Table of Contents
dji MATRICE 300 RTK Upward Gimbal Connector
In the Box
- Upward Gimbal Connector
- Spare Gimbal Damper
Disclaimer and Warnings
Please read this entire document and all safe and lawful practices DJITM
provided carefully before use. Failure to read and follow instructions and
warnings may result in serious injury to yourself or others, damage to your
DJI product, or damage to other objects in the vicinity. By using this
product, you hereby signify that you have read this disclaimer and warning
carefully and that you understand and agree to abide by the terms and
conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. DJI
accepts no liability for damage, injury or any legal responsibility incurred
directly or indirectly from the use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and
its affiliated companies. Names of products, brands, etc., appearing in this
document are trademarks or registered trademarks of their respective owner
companies. This product and document are copyrighted by DJI with all rights
reserved. No part of this product or document shall be reproduced in any form
without the prior written consent or authorization of DJI.
This document and all other collateral documents are subject to change at the
sole discretion of DJI. For up to date product information, visit
http://www.dji.com and click on the product page for this product.
This disclaimer is available in various languages. In the event of divergence
among different versions, the English version shall prevail.
Introduction
The MATRICETM 300 RTK Upward Gimbal Connector is used to mount a compatible payload to the top of the Matrice 300 RTK aircraft. Its design gives it an IP44 Ingress Protection (only when equipped with a waterproof payload), in accordance with the global IEC 60529 standard.
Usage
This device is a spare part of Matrice 300 RTK. Visit https://www.dji.com/matrice-300/downloads to view the Matrice 300 RTK Quick Start Guide and Matrice 300 RTK User Manual to see how to mount and use the product. View the Matrice 300 RTK Disclaimer and Safety Guidelines to learn more about safe usage.
Please refer to http://www.dji.com/service for after-sales service for your
product where applicable.
DJI shall mean SZ DJI TECHNOLOGY CO., LTD. and/or its affiliated companies
where applicable.
Compliance Information
FCC Compliance Statement: Supplier’s Declaration of Conformity
Product name: Gimbal Connector Cable
Model Number: GIMBAL CONNECTOR CABLE
Responsible Party: DJI Technology, Inc.
Responsible Party Address: 201 S. Victory Blvd., Burbank, CA 91502
Website: www.dji.com
We, DJI Technology, Inc., being the responsible party, declares that the above
mentioned model was tested to demonstrate complying with all applicable FCC
rules and regulations.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
ISED Compliance
CAN ICES-003 (B)/NMB-003(B)
EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that
this device is in compliance with the essential requirements and other
relevant provisions of the Directive 2014/30/EU.
A copy of the EU Declaration of Conformity is available online at www.dji.com
/euro-compliance
EU contact address: DJI GmbH, Industriestrasse 12, 97618, Niederlauer,
Germany
GB Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that
this device is in compliance with the essential requirements and other
relevant provisions of Electromagnetic Compatibility Regulations 2016.
A copy of the GB Declaration of Conformity is available online at www.dji.com
/euro-compliance
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
Download the latest version from https://www.dji.com
If you have any questions about this document, please contact DJI by sending a
message to DocSupport@dji.com
DJI is a trademark of DJI.
Copyright © 2021 DJI All Rights Reserved.
Printed in China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>