JOHN LEWIS Hiko Ceiling Pendant User Guide
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS Hiko Ceiling Pendant
Caring for your product
We recommend cleaning with a soft, dry cloth. Do not use abrasive cleaning
materials as these will damage the finish. Indor use only. Replace bulbs from
John Lewis or established brand of the same type and compatibility.
Aftercare and Troubleshooting
If you experience any unresolvable technical issues with the product, contact
your nearest John Lewis & Partners shop or John Lewis & Partner Technical
Support on 03301 230106.
Specification
Max. power: 5W M ax LED
Rated input: 240V, 50Hz
IP rating: 20
Weight: 4.6 kg
5 years guarantee
At John Lewis & Partners we test every light to high quality standards so we are able to offer you a 5 years guarantee.
Recycling
Caring for your product We recommend cleaning with a soft, dry cloth. Do not
use abrasive cleaning materials as these will damage the finish. Indor use
only. Replace bulbs from John Lewis or established brand of the same type and
compatibility. This symbol indicates that this product should not be treated
as normal household waste and it should be recycled. John Lewis & Partners do
not operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities across
the UK. Please take it to your nearest collection facility or for further
details contact your local council or visit www.recycle-more.co.uk.
Introduction
Thank you for purchasing this Hiko ceiling pendant. Please read the instructions carefully before use to ensure safe and satisfactory operation of this product.
Warnings
- This product is Class II.
- For your safety, this product must be installed in accordance with local Building Regulations.
- If in any doubt, or where required by the law, consult a competent person who is registered with an electrical self-certification scheme. Further information is available online or from your Local Authority.
- To prevent electrocution, switch off at the mains supply before installing or maintaining this fitting. Ensure other persons cannot restore the electricity supply without your knowledge.
- Always use the correct type and rated power bulb. Never exceed the rated power stated.
- When changing a bulb, always switch off at the mains and allow the old bulb to cool down before handling. Dispose of used bulbs carefully.
- The bulb and surrounding parts can become extremely hot during use.
Parts list
Product assembly
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>