AEE MACH6 Multi Purpose Industrial Long Range Drone User Manual

AEE MACH6 Multi Purpose Industrial Long Range Drone

ATTENTION

• Pictures only for reference
• Before flying this aircraft, please read this manual carefully and completely.
• Keep it safe for later reference.

Welcome message from the General Manager of AEE Technology Inc.
Good day and thank you for your purchase of the AEE Mach (im) 6 UAV System. My name is Mike Kahn and I am the General Manager of AEE Technology Inc., a US corporation based in Southern California. About 4 years ago, I decided to design a Commercial UAV System aimed at the professional American Drone Pilot. I wanted to create a system that added value to the drone industry and addressed the concerns of American Professional Drone Pilots. I used my 25 year of experience in the electronics industry to develop a new standard in industrial drones. I paid particular attention to Data Integrity with AEE Mach Series Commercial Drones; there is no cloud just point-to-point GSC to Aircraft communication. At AEE Technology we develop, design, market, sell and service our systems here in the United States. Transparently, we do manufacturing in China to keep our prices competitve and attractive to the Professional UAV System. But again, Data Integrity is paramount to our systems which do not use any factory-installed cloud-based technology. Your Trust and customer relationship is our most important goal. Sincerely,

General Manager of AEE Technology Inc

Introduction

Introduction
Thank you for purchasing the AEE Mach6 Hexcopter. This advanced UAV system offers some key industry-leading features including but not limited to : 1) Up to 50 mins flight time, 2) Up to 13 Lbs of payload lift, 3) Up to 3 Smart controllable Payloads attached to UAV at the same time.4) Smart battery system which allows for cycle record keeping 5) All-weather capability 6) Advance millimeter radar for collision avoidance and works even at night.

Safety Precautions

• Do not disassemble or modify the AEE unmanned aircraft system product without permission.
• Having experienced drone pilots to guide the flight are advised.
•  Avoid starting two drones at close range simultaneously to prevent accidents.
• Check whether all parts of the product are in good condition. No flight is allowed in case of any damaged parts.
• Ensure that both the video antenna and the radio antenna are installed correctly for the flight to avoid affecting the flight and video receiving distance or causing damage to the transmitting module inside the drone and remote controller.
• Do not shut down the remote control and ground station in violation of the regulation during use, so as to avoid unpredictable consequences.
• Keep away from the running parts, and do not touch and keep away from any rotating parts while the drone’s propeller is running.
• Keep your head away from the propeller to avoid danger. At the same time, ensure that the drone is kept away from small metal objects, so as to prevent danger due to the absorption of such objects by the drone.
• Ensure that the drone is the center of the circle when taking off and landing, and that there are no moving people or obstacles within a radius of 30 foot. When operating this AEE unmanned aircraft system product, the drone should only be allowed to fly in a safe area away from the crowds, and it is important to pay attention to your own safety and the people around you.
• Please ensure that each waypoint has a sufficient altitude (the altitude of a waypoint is that relative to the take-off position of the drone) when editing the waypoints in order to prevent the flight route from intersecting with mountains or buildings, which will result in the collision between the drone and mountains or buildings during the flight.
• Remove the protective rubber plugs when using the power battery, and put the rubber plugs back in place after using to avoid short-circuit damage to the battery.
• Remove the protective rubber plugs when using the power battery, and put the rubber plugs back in place after using to avoid short-circuit damage to the battery.
• Be sure to remove all the accessories installed on the aircraft and put them back in place after the flight mission is completed to avoid damage to the accessories due to improper operation.
• Please charge and discharge batteries at least once every three months to maintain the battery (battery of UAV and remote controller).
• Hold the fuselage when moving the drone. Do not hold the drone arm or landing gear separately, so as to avoid damage caused by improper use.
• Keep away from heat sources to avoid the aging deformation or even melting damage of thermoplastic materials of the drone caused by high temperature.
• Please follow the user’s manual and do not operate in violation of local laws and regulations for the safety of your life and property.

UAV Preparation

1. Unfolding, locking and folding of drone arm as shown below:
2. landing gear quick assembly & disassembly
   • Assembly & disassembly of long tripod as shown below: Please note there are two leg sizes depending on the type of terrain you are launching in.
   • Assembly & disassembly of short tripod as shown below:
3. Propeller Installation
   • The positive propeller and counter propeller are marked with “CW” and “CCW” respectively. The propellers are installed at the consequence of positive – counter – positive – counter – positive
   • counter from the left side of the UAV nose. Once the propellers are matched with the UAV, fasten with screws. (The UAV has 6 rotor arms and multiple rotors; among which, two propellers are different from the rest 4 propellers, please install them carefully). As shown below:
4. Installation of figure & data transmission antenna and RTK antenna
   As shown below:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>