ULINE S-14803 Warehouse Aisle Signs Instructions
- June 7, 2024
- ULINE
Table of Contents
ULINE S-14803 Warehouse Aisle Signs
INSTRUCTIONS
CONTENTS
Ten (10) plastic sign holder clips and twelve (12) sheets of heavy duty
laser/ink jet compatible paper.
CLIP APPLICATION
Insert sign holder clip into standard pallet rack assembly holes. Snap out to
relocate (May also be used with any shelving with 2″ hole spacing.).
SIGN IMPRINTING
Using the computer program and font of your choice, you can produce a double
sided 8½ x 11″ sign by printing on the front and back side of each sheet. To
create an 8½ x 5½” sign, print a portrait image on each half of the sheet,
then fold.
SIGN MOUNTING
Sign holder clips are engineered to hold paper insert or plastic sign blank up
to 0.10″ thick. Insert the sign into the ribbed slots. Remove by pulling the
sign out vertically from the top or bottom (The sign holding mechanism is not
designed to allow signs to be pulled out in the horizontal direction.). The
soft, plastic hinge will flex to prevent breakage when sign is bumped.
OVERSIZED SIGNS
Larger signs can be mounted by using two (2) or more plastic sign holder
clips.
