CANYON SB75 Smart Coach Fitness Band User Guide
- June 7, 2024
- CANYON
Table of Contents
Fitness band
Smart coach SB75
Quick Guide v3
SMART COACH WITH ECG-BASED PERSONAL VIRTUAL COACH FUNCTION.
- ECG diagnostics
- Multi-sport mode
- 0,96 inch TFT screen
- IP67 waterproof rating
- Camera remote
- Compatibility with iOS and Android OS
Complete set
- Fitness band
- User manual
DEVICE OVERVIEW
- Strap (removable strap)
- ECG measurement contacts
- TFT monitor
- Sensor button (switch function, press and hold to confirm or exit the page)
- Battery charging indicator
- PPG sensor
INTRODUCTION
Thank you for purchasing the SB75 Smart Coach!
The SB75 is equipped with all the modern functions of a fitness bracelet
(number of steps taken (pedometer), calories monitor, sleep duration, heart
rate measurement, displaying new messages from the smartphone, etc.), but, in
addition, it has a unique feature – measuring the ECG (electrocardiogram)!
Of course, this is not a medical device: the SB75 only measures the ECG in
lead I – left / right hand. However, using innovative equipment and a unique
approach, we learned how to get a lot of useful and necessary information for
the SB75 user.
With the help of a high-frequency sensor (500 Hz), we obtain detailed high-
resolution ECG images.
Thanks to the increased memory and a cloud-based data solution, within seconds
of completing measurement, the SB75 user receives the processed results in the
Canyon Life app in the form of clear graphs and values. The data obtained is
the result of the use of unique mathematical algorithms for processing high-
resolution ECG images. This is important because the algorithm can obtain more
information from these pictures, not only the pulse.
At the moment (beginning of 2021), we have learned to decipher such important
indicators of a person’s
health as his psycho-emotional and physiological state (readiness for cardio
loads, stress level, etc.). In addition, the app will offer you expert advice
on your workout or recovery. Also in the Canyon Life application, you can save
and share the ECG result as a graphic file.
And also, for the first time in the history of Canyon, we have implemented
cloud storage of the results obtained, which means that even with a change of
phone, your data will be available to you and to no one else, because it is
reliably protected in accordance with the rules of the GDPR (General Data
Protection Regulation).
We are sure that this is just the beginning, and the functionality of this
unique device is far from being exhausted – we will definitely please you with
new opportunities because our developers are working on it right now!
Read this instruction manual before using the SB75 Smart Coach, or check the
Canyon official website for a more detailed version.
USAGE
Make sure that your fitness band is fully charged before usage.
Charging: remove the strap of the fitness band from the side of the
sensor button, as shown in the figure. Then plug the USB connector into the
USB port of your computer, a wall socket adapter, or a power bank. Charging
progress will be indicated on
the screen. For more efficient charging, it is advisable to use a Power Bank
or wall charger produced by Canyon.
Charger requirements: 5 V/1А.
Charging time: 2-3 hours depending on the source of the charge.
Turning on: press and hold the sensor button for 3 seconds.
Turning off: press the sensor button to activate the screen, then tap it
several more times to see a menu item “System”. Press and hold the button to
enter the submenu. Tap until you see “Shutdown – Yes”, then press and hold the
button.
Connecting to a smartphone: charge the fitness band, turn it on, activate
Bluetooth on your smartphone, download and install Canyon Smart Watch
application Canyon Life by scanning the QR code below. Open Canyon Life app->
”Bluetooth Devices”-> ”Start”-> choose your watch from the devices list (SB75)
-> press ”ADD DEVICE”. Use the application to apply needed settings: turn on
periodic heart rate measurement, fill in your body parameters, select apps
that you want to receive notifications from, etc.
Register or log in to the system to activate the ECG diagnostic functionality.
Scan this Qr code to download and install the application Сanyon Life:
WATCH FACES
If you want to change the watch face of your smartwatch, press the current
watch face for 3-5 seconds.
FUNCTIONS
activities data
Press the sensor button once to go to the sports results screen: a number of
steps taken ‘ estimated distance, calories burned for the current day. Similar
data is stored in the smartphone.
*** for the correct calculation of these parameters, be sure to specify the
correct parameters in the application settings after connecting the device
(height, weight, age, etc.).
ECG
There are 2 ways to start ECG measurement.
А) Starting a measurement from the device:**
Press the sensor button to activate the screen. Then tap it a few more times
to open the ECG section of the menu.
Press and hold the sensor button to start ECG measurement. After starting the
function, move your finger to the ECG contact and hold it there until the
measurement is completed. The measurement process is displayed on the screen
with a stylized ECG diagram.
If the measurement is successful, at the end of the measurement, the device
will inform you that the result has been sent to the smartphone. In case of
failure, it will display an error message.
B) Starting a measurement via the app:
Go
to the Canyon Life app, select and start “ECG measurement”. On the screen, the
menu for ECG measurement will be opened.
Put the watch in your hand, touch the contact for ECG measurement with the
index finger of your other hand (without the watch) and hold this finger there
until the end of the measurement (30-60 seconds).
The measurement process is displayed on the smartphone screen with a stylized
ECG diagram.
Attention: for correct ECG measurement, make sure that in the Canyon Life
application, in the device settings, the hand on which the bracelet is worn is
set correctly; during the entire measurement (30-60 seconds) make sure the
device fits snugly to the wrist, the finger is in continuous contact with the
ECG contact, the body is in a relaxed state. In the event that violations were
made during the measurement (the finger was removed from the contact / the
bracelet did not fit snugly against the wrist / during the measurement there
was a change in body position / the skin of the wrist or finger is too dry,
etc.), the device will signal that the measurement ended with an error … In
this case, the measurement must be repeated, strictly following the provisions
of this manual.
Attention: The measurement results are for informational purposes only
and should not be the basis for medical diagnoses.
Incorrect posture, talking, hand position, skin moisture, tightness of the
bracelet on the wrist, etc., affect the measurement
accuracy.
Attention: to process ECG data and receive processed results, the
smartphone must have access to the Internet.
heart rate
Press and hold the sensor button to start the heart rate measurement. Wait for
10-15 seconds for the measurement to be completed. The result will be
displayed on the screen and sent to the smartphone.
This function can also be launched from the application by selecting the
appropriate menu item.
Notifications alerts
The device stores the last three messages received from the
mobile phone.
The watch must be connected to the phone via the Canyon Life app. In the
application settings, you must specify from which programs and services
notifications should be shown.
find phone
Press
and hold for three seconds to start the Find Phone function. The phone will
ring if there is a connection.
Sleep monitoring The default sleep time is set from 22:00 to
8:00. Sleep results for the previous night will be displayed after 8:00.
The data can be synchronized with the app and you can view the detailed
information and sleep analysis in the app.
Timer
Press and hold for 3 seconds to enter the timer interface. Press shortly to
start /stop the timer. Press and hold for three seconds to exit.
Multi-sport Press and hold the sensor button to enter
the submenu and select a sport type.
Select from 4 sport types by briefly clicking the button: running, walking,
climbing, or cycling.
Press and hold to start the chosen
workout. Press and hold the button for 1 second to pause the workout. Press
and hold again to resume training. When paused briefly clicking the button
will stop training and return you to the previous menu.
Device information
This interface displays the BT device name, the last 4 characters of the Mac
address and firmware version. Press and hold to enter the Power Off menu.
Power Off
After opening the Power Off menu press briefly to switch to Yes, press and
hold for three seconds to turn off your device.
TROUBLESHOOTING
Problem
|
Solution
---|---
You’re smart
The coach doesn’t turn on| Connect your watch via USB connector to a USB port
or a socket adapter and wait for a few
Your smart coach isn’t detected by a| Make sure that Bluetooth and GPS high
accuracy are active on your smartphone. Make sure the watch is not connected
nected to another smartphone.
Your smart coach is detected by a smartphone but fails to connect| Turn the
smart coach off and then turn it back on. Turn off and then turn on Bluetooth
on your phone. Reboot your phone.
The smartwatch is connected, but many of the functions are not working.|
(Android only) Make sure that the smartwatch is connected to the smartphone
via the Canyon Life app only, and not paired via the Android Bluetooth
setting.
The smartphone constantly disconnects from the app.| You must give permission
for the application to run in the background on your phone. Read the detailed
instructions on the official Canyon website.
After the completion of the ECG measurement, the diagnostic decoding is
missing in the application.| Make sure your smartphone is connected to the
Internet; the watch is connected to the smartphone via the Canyon Life
application, registration/authorization is performed in the application
If the actions from the above-mentioned list do not help, please contact the support service at the Canyon website: http://support.canyon.eu/
SAFETY INSTRUCTIONS
Read and follow all instructions before usage of this device.
- Protect the device from an excessive amount of water: this smartwatch is protected only from small amounts of water such as raindrops or short spills. It’s forbidden to put it under powerful jets of water, fully immerse it, or to wear it while swimming.
- protect the device from heat: do not place heating devices near it, and do not expose to direct sunlight during hot season for a long time, do not use in the sauna.
- Protect the device from breaking: avoid dropping the device from over 0,5m to hard surfaces.
warning! Do not use hot water. This can lead to damage to the device!
WARRANTY LIABILITIES
The warranty period starts from the date of the device’s purchase from the
Seller, authorized by Canyon.
The date of purchase is indicated in your sales receipt or a waybill. During
the warranty period, a repair, replacement or refund of payment for goods are
performed at discretion.
Manufacturer:
Asbisc Enterprises PLC, 43, Diamond
Court, Kolonakiou Str, 4103, Limassol, Cyprus, Ayios
Athanasios, http://canyon.eu/
Warranty card
www.canyon.eu All other products names
a d trademarks are property of their respective owners
References
- Canyon | Mobile and Computer Accessories
- Canyon | Мобильные и компьютерные акÑеÑÑуары
- Canyon
- Podpora
- Support Center / Canyon User Portal
- Центр Поддержки / Canyon User Portal
- Canyon
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>