ROCKVILLE Karaoke Speakers with Wall Brackets Instruction Manual
- June 7, 2024
- RockVille
Table of Contents
KPS KARAOKE SPEAKERS w/WALL BRACKETS MOUNTING INSTRUCTIONS
Thank you for purchasing this set of Rockville KPS Karaoke Speakers with wall Brackets. Please read these instructions carefully before use. Make sure all parts are included. If any parts are missing or you need assistance, please contact our technical helpline at 1-646-758-0144, Monday through Thursday, 9 am to 10 pm EST, and Fridays, 9 am to 3 pm EST.
WHO READS MANUALS?
Instead, go to vimeo.com/545533310 or scan the QR code and watch a short video that shows you how to set this item up and how to use it. If you prefer written instructions, please read ahead! With Rocky* you get many options.
SPEAKER DETAILS
WALL-MOUNT INSTALLATION
To mount the KPS units, make a mark on the wall where you wish to mount the speaker. Using a drill, make a hole where you made your mark (fig A). Repeat for your other marks. We recommend using wall anchors (fig B; not included) or drilling into a stud. If you are using anchors, make sure the holes are deep enough to accommodate them. Once the mounting screws (not included) are in place, simply lift the speaker and slide onto the mounting screws (fig C). Now tug the speaker down slightly to ensure that it is seated properly (fig D).
SPEAKER STAND INSTALLATION
The KPS speakers can be pole mounted using the Rockville RVSS2 speaker stand (sold separately) and the Rockville RVSSA1 universal 35mm speaker stand adapter (sold separately). Both of these items can be purchased at RockvilleAudio.com
Use a Phillips head screwdriver to remove the two fixing screws located at the
bottom of the unit.
Affix the pole mount tray using the two screws.
Carefully mount the speaker onto any standard speaker stand. Secure the speaker to the stand by tightening the locking knob.
OPTIONAL SWIVEL WALL MOUNT INSTALLATION
The KPS speakers can be wall-mounted using the Rockville RPW20 adjustable wall
mount bracket (sold separately) and the Rockville RVSSA1 universal 35mm
speaker stand adapter (sold separately). Both of these items can be purchased
at RockvilleAudio.com
Carefully mount the speaker onto the RPW20. Secure the speaker to the wall
mount bracket by tightening the locking knob. To adjust the position of the
speaker, follow the directions included with the RPW20 bracket.
Use a Phillips head screwdriver to remove the two fixing screws located at the
bottom of the unit.
Affix the pole mount tray using the two screws. 
RockvilleAudio.com
02021 ROCKVILLE // The information presented is subject to change and or
improvement without notice.