biamp BRC100 BLE5.0 Bluetooth Remote Control Instructions
- June 3, 2024
- biamp
Table of Contents
biamp BRC100 BLE5.0 Bluetooth Remote Control Instructions
Product Description
Biamp is a BLE5.0 Bluetooth remote control, which uses wireless communication
to control the terminal equipment and uses two CR2032 cell batteries for power
supply bluetooth name: biamp
Pairing method: long press the number “1” + “2” key for 3 seconds
Fixed frequency test : long press the “OK” button and then power on,
enter the fixed frequency 2.44Ghz
Product use environment
- Power supply voltage: DC3.0V 2 CR2032 button batteries connected in parallel
- Voltage range: 2.4V-3.3V
- Working temperature: -10℃~40℃
- Working humidity: 10%-90% RH
- Storage temperature: -40℃~80℃
- Storage humidity: 5%-95% RH
Electrical performance parameters
- Use MCU model BK3432 (ZK18-01) QFN32 4*4
- Software version: V1.0
- Crystal oscillator: 16Mhz, 10ppm, CL=9pf, internal resistance less than 40 ohms, package: 3225
- Bluetooth frequency: 2400~2483Mhz
- Quiescent current: ≤10uA
- Dynamic current: ≤5mA
- Remote control distance: ≥10 meters
RF exposure statement
This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC WARNING
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>