My ICONpet™ Cordless Vacuum has No Power/Lights Flashing | Support
- June 7, 2024
- Bissell
Table of Contents
| Error | Lights Displayed | Possible Cause | Remedies |
|---|---|---|---|
| Blue Blinking at 1 Dot| Suction Motor Fault| Indicates a blockage in the air
path > See detailed instructions
HERE
| Blue Blinking at 2 Dots| Brush Roll Stall| Indicates an obstruction in the
Brush area > See detailed instructions
HERE
| Blue Blinking at 3 Dots
& White Battery Lights| Battery Issue|
Turn OFF > Wait few second > Turn On
If Error still present > Please Contact Us
| Blue Blinking at All Dots
& White Battery Lights| Air Flow Issue| Indicates a blockage in the air path >
See detailed instructions
HERE
| Only 3 White Battery Lights are Blinking| Battery Issue|
Turn OFF > Wait few second > Turn On
If Error still present > Please Contact Us
| | |
- Check the outlet being used to charge machine
- Test the outlet with a different device, like a cell phone charger or small appliance
- Verify correct charger is being used
- Label on charger should have Model SSC-320110US
- If Charger is damaged > Replace Charger > Go to Parts & Supplies
-
Connect Charger to the charging port on the back of the Hand Vac & plug into wall outlet
-
Normal charging behavior: White Light segments of battery icon blink individually
- Full charge: All White Lights segments are solid White
- If not, please Contact Us
-
Machine will not run while plugged into Charger
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No