My EV675™ Multi-Surface Robotic Light Status/Error Codes | Support
- June 7, 2024
- Bissell
Table of Contents
| Light Status | Sound | Possible Cause | Remedies |
|---|---|---|---|
| Flashing Red | 1 Beep | Cliff Sensors are dirty |
Clean the Cliff Sensors with a dry cloth
Flashing Red| 2 Beep| Low power| Charge the battery
Flashing Red | 3 Beeps| Robot is on ledge or trapped | Turn Robot OFF > Move
to new location
Front Caster Wheel Sensor is dirty|
Turn Robot OFF > Remove Front Caster Wheel Assembly > Clear debris from assembly and housing > Reinstall wheel
Flashing Red | 4 Beeps| Low suction| Turn Robot OFF > Empty the Dust Bin >
Remove hair & debris from the suction inlet & filters
Solid Red| 1 Beep| Wheels are stuck| Turn Robot OFF > Remove hair & debris
from wheels
Solid Red| 2 Beeps| Edge Cleaning Brushes are stuck| Turn Robot OFF > Remove
hair & debris from edge cleaning brushes
Solid Red| 3 Beeps| Brush Roll is stuck| Turn Robot OFF > Remove hair & debris
from brush roll
Solid Red| 4 Beeps| Bumper is stuck| Turn Robot OFF > Tap the Bumper several
times to release any accumulated debris
If remedy does not resolve the issue, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No