Soundcore Liberty Neo User Manual: Pairing, Reset & Instructions
- June 7, 2024
- Anker
Table of Contents
The ANKER Soundcore Liberty Neo User Manual provides detailed instructions on how to use and pair the Soundcore Liberty Neo earbuds. The manual includes information on how to wear the earbuds, charge them, and turn them on and off. Additionally, it provides instructions on how to pair the earbuds with Bluetooth devices and connect them for True Wireless Stereo. The manual also explains the various controls for music and call management, including voice control. In case of any issues with the earbuds, the manual provides a reset guide. Finally, the specifications of the product are listed, including charging time, playtime, weight, impedance, driver, frequency response, Bluetooth version, and range. This user manual is an essential guide for anyone who has purchased the Soundcore Liberty Neo earbuds and wants to make the most out of their features.
ANKER Soundcore Liberty Neo User Manual
What is in the box
Overview
Wearing
-
Choose the EarTips and jackets that fit your ears the best.
-
Insert the earbuds into the inner canal of your ears.
-
Turn to lock.
Note: Remove the film on the earbuds when taking them out of the charging
case for the first time.
If all the jackets are too large, Soundcore Liberty Neo can be used without
jackets.
Charging
Charge the charging case before using the earbuds for the first time. Place the earbuds in the charging case before you start charging.
Note: Clean the charging pin on a regular basis to prevent connection
issues.
Open or close the charging case to activate the LED battery indicator on the
charging case.
Earbud status indicator
- Flashing red (once every minute): Low battery
- Steady white: Charging
- Off: Fully charged
Turn On / Off
-
The earbuds switch on automatically when taken out of the charging case. To manually switch on the earbuds, press and hold the multi function button for 1 second until the indicator blinks white on both earbuds.
- ON: Flashing white once (Earbud status indicator)
-
The earbuds switch off automatically when placed back in the charging case. To manually switch off the earbuds, press and hold the multi function button on both the earbuds for 5 seconds until the LED indicator turns red.
- OFF: Flashing red once (Earbud status indicator)
Pairing
Bluetooth connection (Device)
Enter pairing mode when earbuds are switched on
- Rapidly flashing white: Pairing mode
- Slowly flashing white: Connected to a device
True Wireless Stereo connection (Earbuds)
Enter True Wireless Stereo pairing mode when earbuds are switched on.
Rapidly flashing white (Right earbud)
Flashing white (Left earbud)
|
True Wireless Stereo is connecting (The left earbud is connecting to the right earbud) but earbuds are not connected to your device
---|---
Rapidly flashing white (Right earbud)
Slow flashing white (Left earbud)
|
True Wireless Stereo connection is successful (The left earbud is connected to the right earbud) but earbuds are not connected to your device
Slow flashing white (Both earbuds)
|
True Wireless Stereo connection is successful (The left earbud is connected to the right earbud) and earbuds are connected to your device
Controls
Music Control
|
Press
|
Play / pause
---|---|---
|
Press and hold for 1 second (The multifunction button on the right earbud)
|
Next track
|
Press and hold for 1 second (The multifunction button on the left earbud)
|
Previous track
|
Control volume via the connected device
|
Volume up / down
Call Control
| Press| Answer / End call
---|---|---
| Press and hold for 1 second|
Reject call
| Press (The multifunction button on the right earbud)| Put current call on
hold and answer incoming call
| Press and hold for 1 second (The multifunction button on the right earbud)|
Transfer a call between headphones and mobile phone
| Flashing white| On a call
| Flashing white|
Incoming call
Voice Control
|
Double click the multifunction button on either one of the earbuds
|
Activate Siri / other voice control software
---|---|---
Reset
Reset the earbuds if you can only hear sound on one side:
-
Open the Bluetooth list on your mobile device and delete “Soundcore Liberty Neo”.
-
Make sure charging case still has enough power, place the earbuds into the charging case, press and hold the multi function button on both earbuds for 8 seconds until the LED indicator rapidly flashes red three times, then release the button.
-
Take both earbuds out of the charging case at the same time, the left earbud will automatically connect to the right earbud. The connection is successful if the left earbud flashes slowly and the right earbud flashes rapidly. If the connection was unsuccessful, repeat steps 2-3 until the connection is successful.
-
Open the Bluetooth menu on your mobile device, search for “Soundcore Liberty Neo”, then tap to select it.
Specifications
Note: Specifications are subject to change without notice.
- Earbud Input Rating: 5 V 0.3 A
- Charging Box Input Rating: 5 V 0.5 A
- Charging time: 1.5 hours
- Playtime (varies by volume level and content): 5 hours
- Weight (product net weight): 51 g / 1.8 oz
- Impedance: 16 Ω
- Driver (full range): 6 mm × 2
- Frequency response: 20 Hz – 20 KHz
- Bluetooth version: V5.0
- Range: 10 m / 33 ft
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Specification
Specification
|
Value
---|---
Earbud Input Rating
|
5 V 0.3 A
Charging Box Input Rating
|
5 V 0.5 A
Charging time
|
1.5 hours
Playtime (varies by volume level and content)
|
5 hours
Weight (product net weight)
|
51 g / 1.8 oz
Impedance
|
16 Ω
Driver (full range)
|
6 mm × 2
Frequency response
|
20 Hz – 20 KHz
Bluetooth version
|
V5.0
Range
|
10 m / 33 ft
Faqs
What are the specifications of the Soundcore Liberty Neo earbuds?
The specifications include earbud input rating, charging box input rating, charging time, playtime, weight, impedance, driver, frequency response, Bluetooth version, and range.
How do I reset the earbuds?
If you can only hear sound on one side, open the Bluetooth list on your mobile device and delete “Soundcore Liberty Neo”. Place the earbuds into the charging case, press and hold the multi function button on both earbuds for 8 seconds until the LED indicator rapidly flashes red three times, then release the button. Take both earbuds out of the charging case at the same time, the left earbud will automatically connect to the right earbud.
How do I activate voice control?
Double click the multifunction button on either one of the earbuds to activate Siri/other voice control software.
What are the controls for music and call management?
Press for play/pause, press and hold for next/previous track, control volume via connected device, press to answer/end call, press and hold to reject call, press and hold to put current call on hold and answer incoming call.
How do I connect the earbuds for True Wireless Stereo?
Enter True Wireless Stereo pairing mode when earbuds are switched on. Rapidly flashing white (Right earbud) and flashing white (Left earbud) indicate True Wireless Stereo connection.
How do I turn on/off the earbuds?
The earbuds switch on automatically when taken out of the charging case. To manually switch on/off the earbuds, press and hold the multi function button.
How do I wear the Soundcore Liberty Neo earbuds?
Choose the EarTips and jackets that fit your ears the best. Insert the earbuds into the inner canal of your ears. Turn to lock.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>