JOHN LEWIS 706 03252 / 706 03254 / 706 03255 ANYDAY BOBBY TABLE LAMP User Guide
- June 7, 2024
- John Lewis
Table of Contents
JOHN LEWIS 706 03252 / 706 03254 / 706 03255 ANYDAY BOBBY TABLE LAMP User
Guide
Getting started
Thank you for purchasing this John Lewis Partnership product. For your safety, and to make sure everything is working properly, please read the instructions carefully before use.
Warnings
To prevent electric shock, switch off at the mains supply before installing or maintaining this fitting. Ensure another person cannot restore the electricity supply without your knowledge.
If you are in any doubt, please consult a qualified electrician. Always use
the recommended bulb type and rated power. Never exceed the rated power
stated.
The flexible cable on this luminaire, if damaged, shall only be replaced by
the manufacturer or his service agent or a similar qualified person. It is the
installer’s responsibility to ensure that the fixings and plugs used are
suitable for the surface you are fixing your product on.
Caution! The bulb and surrounding parts can become hot during use. Do not cover. Keep away from curtains, bedding etc. Always route mains cable so it does not present a hazard (entrapment, tripping etc.); Ensure that there are no twists or snags in the cable. Plug into the mains supply; switch on using the inline cord switch provided. When moving this lamp, always carry by holding the stand part.
Parts List
| Description | Image | Quantity |
|---|---|---|
| Table lamp base | X 1 | |
| Shade | X 1 | |
| Metal spacer | X 1 | |
| Shade ring | X 1 |
Product assembly
Step 1
Unpack the product and remove all packaging material. Be careful not to scratch the surface of the product whilst removing the wrapping.
Step 2
Remove the shade ring and metal spacer already attached to the lamp holder. Place the shade over the lamp holder, refit metal spacer, and use shade ring to secure the shade in place.
Step 3
Attach the recommended type and rated power bulb to the lamp holder (bulb not
included).
Do not use a bulb that exceeds the maximum power indicated (see reverse).
Step 4
Insert the plug into the power supply and turn on the switch.
Product information
- Indoor use only
- Non-dimmable
- Replacement bulbs should be the same type and rating, available from John Lewis
- Partners or other established brands
- Clean the fitting with a soft dry cloth
Aftercare and troubleshooting
- If you experience any unresolvable technical issues with the product, contact your nearest John Lewis & Partners shop or
- John Lewis & Partner Technical Support on 03301 230106.
- Why is the light not working when switched on?
- Check your power supply is switched on
- Turn off light and check that the bulb is inserted correctly
- Check the bulb is still in working order.
Specification
- Recommended bulb: SES GB LED bulb
- Rated input: 220 – 240V, 50Hz
- Max. power: 4W LED
- IP rating: 20
- Weight: 1.18kg
5-year guarantee
At John Lewis & Partners we test every light to high quality standards. That means we can offer you a 5-year guarantee.
Recycling
This 
symbol indicates that this product should
not be treated as normal household waste and it should be recycled. John Lewis
& Partners do not operate in store take back, but as members of the
Distributor Take Back scheme have funded the development and upgrade of
recycling facilities across the UK.
Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
John Lewis Plc
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Please retain these instructions for future reference
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>