AXIS Q6135-LE PTZ Network Camera Installation Guide
- June 7, 2024
- AXIS
Table of Contents
AXIS Q6135-LE PTZ Network Camera
Installation Guide
Read this first
Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference.
Legal considerations
Video surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.
This product includes the following licenses:
- one (1) H.264 decoder license
- one (1) H.265 decoder license To purchase further licenses, contact your reseller.
Liability
Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.
Intellectual property rights
Axis AB has intellectual property rights relating to technology embodied in
the product described in this document. In particular, and without limitation,
these intellectual property rights may include one or more of the patents
listed at axis.com/patent and one or more additional
patents or pending patent applications in the US and other countries.
This product contains licensed third-party software. See the menu item “About”
in the product’s user interface for more information.
This product contains source code copyright Apple Computer, Inc., under the terms of Apple Public Source License 2.0 (see opensource.apple.com/aps1). The source code is available from developerapple.com/bonjourt
Equipment modifications
This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user- serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.
Trademark acknowledgments
AXIS COMMUNICATIONS, AXIS, and VAPIX are registered trademarks or trademark
applications of Axis AB in various jurisdictions. All other company names and
products are trademarks or registered trademarks of their respective
companies.
Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft,
Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, and WWW have registered
trademarks of the respective holders. Java and all Java-based trademarks and
logos are trademarks or registered trademarks of Oracle and/or its affiliates.
The UPnP Word Mark and UPnP Logo are trademarks of Open Connectivity
Foundation, Inc. in the United States or other countries.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.
Regulatory information
Europe
This product complies with the applicable CE marking directives and harmonized standards:
- Electromagnetic Compatibility (EMC) Directive 2014/30/EU. See Electromagnetic Compatibility (EMC) on page 2.
- Low Voltage Directive (LVD) 2014/35/EU. See Safety on page 3 .
- Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates, or replacements. See Disposal and recycling on page
A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 4.
Electromagnetic compatibility (EMC)
This equipment has been designed and tested to fulfill applicable standards
for:
- Radiofrequency emission when installed according to the instructions and used in its intended environment.
- Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.
USA
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired
This equipment has been tested using a shielded network cable (STP) and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The product shall be connected using a shielded network cable (STP) that is properly grounded.
Contact information
Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000
Europe
This digital equipment fulfills the requirements for RF emission according to the Class A limit of EN 55032. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment, this product may cause RF interference, in which case the user may be required to take adequate measures.
Australia/New Zealand
This digital equipment fulfills the requirements for RF emission according to the Class A limit of AS/NZS CISPR 32. The product shall be connected using a shielded network cable (STP) that is properly grounded. Notice! This is a Class A product. In a domestic environment, this product may cause RF interference, in which case the user may be required to take adequate measures.
Safety
This product complies with IEC/EN/UL 62368-1, safety of audio/video and IT
equipment, and IEC/EN/UL 60950-22, Safety of Information Technology Equipment.
The product shall be grounded via an appropriate grounding cable.
When used with Power over Ethernet (PoE), the Power Sourcing Equipment (PSE)
shall comply with IEEE 802.3af/802.3at and Limited Power Source (LPS)
according to clause 2.5 of IEC/EN/UL 60950-1 or annex Q of IEC/EN/UL 62368-1.
We recommend the use of Axis High PoE midspans or Axis High PoE switches
Photobiological safety
This product fulfills the requirements for photobiological safety according
to IEC/EN 62471 (risk group 2).
Disposal and recycling
When this product has reached the end of its useful life, dispose of it
according to local laws and regulations. For information about your nearest
designated collection point, contact your local authority responsible for
waste disposal. In accordance with local legislation, penalties may be
applicable for incorrect disposal of this waste.
Europe
This symbol means that the product shall not be disposed of together with
household or commercial waste. Directive 2012/19/EU on waste electrical and
electronic equipment (WEEE) is applicable in the European Union member states.
To prevent potential harm to human health and the environment, the product
must be disposed of in an approved and environmentally safe recycling process.
For information about your nearest designated collection point, contact your
local authority responsible for waste disposal. Businesses should contact the
product supplier for information about how to dispose of this product
correctly.
This product complies with the requirements of Directive 2011/65/EU and
2015/863 on the restriction of the use of certain hazardous substances in
electrical and electronic equipment (RoHS).
China
****This product complies with the requirements of SJ/T 11364-2014, Marking for the restriction of hazardous substances in electrical and electronic products.
Contact information
Axis Communications AB
Emdalavagen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
Warranty information
For information about Axis’ product warranty and thereto related
information, go to oxis.com/warranty.
Support
Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:
- download user documentation and software updates
- find answers to resolved problems in the FAQ database, search by product, category, or phrase
- report problems to Axis support staff by logging in to your private support area
- chat with Axis support staff
- visit Axis Support at com/support
Learn more!
Visit Axis learning center axis.com/academy for useful training, webinars, tutorials, and guides.
AXIS Q6135-LE PTZ Network Camera
Safety information
Hazard levels
DANGER
Indicates a hazardous situation that, if not avoided, will result in death
or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided, could result in death
or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided, could result in minor
or moderate injury.
NOTICE
Indicates a situation that, if not avoided, could result in damage to
property.
Other message levels
Important
Indicates significant information which is essential for the product to
function correctly.
Note
Indicates useful information which helps in getting the most out of the
product.
Safety instructions
WARNING
IR emitted from this product. Do not stare at the operating lamp.
NOTICE
- The Axis product shall be used in compliance with local laws and regulations.
- Axis recommends using a shielded network cable (STP).
- Axis recommends using a network cable of category CAT6 or higher.
- Store the Axis product in a dry and ventilated environment.
- Avoid exposing the Axis product to shocks or heavy pressure.
- Do not install the product on unstable poles, brackets, surfaces or walls.
- Use only applicable tools when installing the Axis Using excessive force with power tools could cause damage to the product.
- Do not use chemicals, caustic agents, or aerosol cleaners.
- Use a clean cloth dampened with pure water for cleaners.
- Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
- Use only spare parts provided by or recommended by Axis.
- Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.
- Do not point the camera lens toward the sun or other high-intensity radiation sources because this could cause damage to the camera.
- Use a yellow/green colored grounding cable of at least 0.5 mm2 or 20 AWG.
Transportation
NOTICE
- When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.
Battery
The Axis product uses a 3.0 V BR2032 lithium battery as the power supply for
its internal real-time clock (RTC). Under normal conditions, this battery will
last for a minimum of five years.
Low battery power affects the operation of the RTC, causing it to reset at
every power-up. When the battery voltage is low, a log message will appear in
the product’s server report.
CAUTION
Do not replace the battery yourself. Contact Axis support if the log message
requests a battery change.
Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol
dimethyl ether (EGDME), CAS no. 110-71-4.
Dome cover
NOTICE
- Be careful not to scratch, damage, or leave fingerprints on the dome cover because this could decrease image quality. If possible, keep the protective plastic on the dome cover until the installation is complete.
- Do not clean a dome cover that looks clean to the eye and never polishes the surface. Excessive cleaning could damage the surface.
- For general cleaning of the dome cover, it is recommended to use a non-abrasive, solvent-free neutral soap or detergent mixed with pure water and a soft, clean cloth. Rinse well with pure lukewarm water. Dry with a soft, clean cloth to prevent water spots.
- Never use harsh detergents, gasoline, benzene, acetone, or similar chemicals.
- Avoid cleaning the dome cover in direct sunlight or at elevated temperatures.
Installation Guide
AXIS Q6135-LE PTZ Network Camera
© Axis Communications AB, 2019
Ver. M1.6
Date: November 2019
Part No. 2066502
References
- Axis Communications - Leader in network cameras and other IP networking solutions | Axis Communications
- Patent statement | Axis Communications
- Welcome to Axis support | Axis Communications
- License - APSL
- Axis Q6135-LE 2MP 32X Zoom PTZ Network Camera 50Hz 01958-003
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>