DESIGN HOUSE 588962-PC Seaton Pendant Light PC Installation Guide
- June 7, 2024
- DESIGN HOUSE
Table of Contents
ITEM# 588962-PC
SEATON PENDANT LIGHT PC SKU# 588962-PC
ASSEMBLY / INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a
later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions. Tools are required when installing this fixture.
REQUIRED TOOLS
Phillips screwdriver, straight screwdriver
ASSEMBLY AND INSTALLATION
Turn off the power at the fuse or circuit breaker.
- Carefully unpack the fixture, layout all parts on a clean surface.
- Attach the MOUNTING STRAP to OUTLET BOX using provided the OUTLET BOX SCREWS.
- Screw TUBE E into BUSHING, screw TUBE D into TUBE E, screw TUBE C into TUBE D, Screw TUBE B into TUBE C. Screw TUBE A into TUBE . Note: 2 x 6 inches rods and 3 x 12 inches rods are included for this pendant. If height adjustment is required, please remove the rod at the desired height.
- Tie the ground wire from the OUTLET BOX and from the fixture to the GROUND SCREW on the MOUNTING STRAP. Connect white fixture wire to white supply wire (neutral wire). Connect black fixture wire to black supply wire (live wire). Cover connections using provided WIRE CONNECTORS.
- Raise the CANOPY against the ceiling and over the MOUNTING SCREWS. Then secure the CANOPY by the LOCK NUT firmly.
- Install the BULB (Not included).
- Twist the GLASS SHADE onto the FIXTURE BODY tightly, then place the CAGE onto FIXTURE BODY and secure it with the SLOT NUT by straight screwdriver (not included) tightly. Turn on the power at the fuse or circuit breaker.
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>