ovela Hampton Style Wall Clock User Guide
- June 7, 2024
- OVELA
Table of Contents
OVELA CLOCK TROUBLESHOOTING GUIDE
OVERVIEW
TROUBLESHOOTING
If the clock is not working, use the below procedure to resolve the problem.
-
Replace the AA battery, ensuring you pay attention to the orientation of the polarity symbols (+ , -).
-
If the clock is not working after replacing the battery, re-install the hands in the order listed below:
• Remove the battery and align both the hour and minute hands to 12 o’clock.
• Unscrew the cap nut.
• Carefully remove both of the clock hands, one at a time from the clock mechanism shaft.
• Ensure the clock hands are not bent. Straighten them if necessary.
• Insert the hour hand onto the shaft, followed by the minute hand, align both hands to 12 o’clock and screw the nut cap back into place.
• Rotate the clock hands two full cycles in a clockwise direction. Ensure the hands are parallel and do not come in contact with each other, the frame or the clock face.
• Replace the battery. -
When hanging the clock on the wall, ensure the wall is flat and nothing is interfering with the dial on the back of the clock mechanism.
Note: The clock does not feature a second hand, you will need to wait a few minutes to check if the clock is working correctly.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up. For the most up-to-date guide for your product, as well as any
additional assistance you may require,
head online to help.kogan.com