ROCKVILLE 6.5″ Powered Bluetooth LED Tower Two Speaker for ATV/UTV/RZR/CART Owner’s Manual

PT65BR
6.5″-POWERED BLUETOOTH LED TOWER TWO SPEAKERS FOR
ATV/UTV/RZR/CART
OWNER’S MANUAL

WHO READS MANUALS?
Instead, go to vimeo.com/500957355 or scan the QR code and watch a short video that shows you how to set this item up and how to use it.
If you prefer written instructions, please read ahead!
With Rockville, you get many options.

https://vimeo.com/500957355

Missing items? If you ordered a bundle that includes more than one product and you are missing part of your bundle then it just means your order shipped from two different warehouses. You will receive the remaining items very soon. If you have any concerns or inquiries, feel free to call our customer support center at 646-758-0144, Monday through Thursday, 9 am to 10 pm EST, and Fridays, 9 am to 3 pm EST.
Thank you for purchasing these Rockville PT65BR tower speakers. Please read this owner’s manual carefully for proper use of your PT65BR. Should you need assis­tance, please call our technical helpline at 1-646-758-0144, Monday through Thursday, 9 am to 10 pm EST., or Fridays, 9 am to 3 pm EST.

Includes

• Two tower speakers (one active, one passive)
• 56-foot speaker wire to connect the active speaker to the passive speaker
• Mounting brackets and mounting hardware to fit 1.5″, 1.75″, 1.875″, or 2″
• Installation hardware
• RGB lighting remote
• 5mm stereo wire
• Owner’s manual
• Warranty card

Parts list

Installation safety considerations

Please remember that these are heavy products that will be installed in a boat. These vehicles can travel at high speeds and be unstable, so please keep this in mind and use extreme caution.

• Do not mount the speaker in a location where someone could either walk into it or strike their head. During a turbulent ride, please make sure that you do not lose footing and fall or hit the unit as it may cause injury.
• Secure the wires to the speaker in multiple locations along the route to the audio source so there are no hanging wires. Having nonsecure wires, especially in low light conditions, can cause entanglement and injury.
• Make sure to use the included rubber inserts when securing the speaker to the wake tower. Do not overtighten the clamp. After installation is complete, and before operating your vehicle or vessel, please check all bolts to ensure they are complete­ly tightened.
• Do not install these speakers where they may block the view of the operator or prevent the safe operation of the vehicle or vessel.

Installation

The two screws can be unbolted to loosen the metal base of The mounting ring to adjust the mounting angle. Make sure to put al components of the mounting hardware in a safe location.

|

After loosening the two screws and determining the optimal angle for your speakers on the mounting bar, tighten the two screws in place to secure the metal base of the mounting ring tightly.

---|---

Place the front rubber pad on the metal base of the mounting ring.

|

Place the supplied rubber strip around the cage bar to prevent scratching. Push the aluminum ring over The cage bar. Align the aluminum ring over the cage bar. Align the aluminum rings with the metal base of the mounting rings on the wake tower speaker

Secure the aluminum rings to the metal base using a pair of M6 x 60mm screws, M6 flat washers, and M6 locknuts as illustrated. The locknut should be installed into the hex-shaped recess on one end of each ring. Do not overtighten. To change the position of the speaker loosen the screws, adjust the speaker, then retighten the screws.

|

PT65BR wake tower speaker installation completed.

Bluetooth

1. Make sure your Bluetooth device is turned on and discoverable.
2. When your device is within range of the speaker, it will connect automatically.
3. If it does not connect automatically, search for and select PT65BR from your device’s list of available Bluetooth connections.
4. To disconnect, simply end the Bluetooth connection via your device. If your device goes out of range, the speaker will automatically disconnect. Once your Bluetooth device is disconnected, the speaker will go into AUX mode.
5. The speaker will connect with the last paired device when it is within range.

Wiring diagram

Remote control

1. Power: Turns the LEDs on or off.
2. Demo Mode: Unit cycles through red, green, and blue LEDs.
3. Dynamic Speed Adjustment: Pressing either one of the buttons will switch the unit to dynamic mode. Press the + button to increase speed, press the – button to decrease speed.
4. Static Color Adjustment: Pressing either one of the buttons will switch the unit to static mode. Press the + and – buttons to cycle through colors.
5. Dynamic Mode Adjustment: Pressing either one of the buttons will switch the unit to dynamic mode. Press the + and – buttons to cycle through dynamic modes.
6. Brightness Adjustment: Press the + and – buttons to increase or decrease the brightness of the LEDs.

Speaker Dimensions

Features:

• Rockville PT65BR 6.5″ Powered Bluetooth Marine/AN Tower Speakers w/LEDs
• Peak Power Handling: 300 Watts
• RMS Power Handling: 100 Watts (RMS 50W x 2 @ 4 Ohm <1% THD)
• All-in-one system with Class “D” amplifier and built-in Bluetooth
• 5mm Aux input
• Heavy-duty ABS enclosure
• IPX6 Water resistance rated
• Marine-grade components are protected from the elements
• Adjustable aluminum mounting bracket is strong and sturdy
• Bracket swivels 360 degrees for quick and easy speaker angle adjustment
• Bracket supports any rollbar from 1.5– to 2– thick
• 5– woofers with 11 oz magnets and oversized 1.25– Kapton voice coils
• 1″ PEI dome tweeters with neo magnets
• Built-in two-way crossover network
• Fully marinized against salt and freshwater conditions
• Completely resistant to water, rust, and UV rays
• Terminals are sealed with rubber gaskets
• Polypropylene-mica-injected cone with butyl rubber surround
• RCA output
• Frequency Response: 60Hz — 20KHz
• SPL: 87dB @ 1w/1m
• Impedance: 4 Ohms
• Bluetooth audio streaming w/33-foot range
• Shockproof design
• ABS weather-resistant grills and hardware
• CE and RoHS certified
• Color: Black
• Dimensions (H x W x D): 9.84″ x 7.17″ x 7.32″

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION
Responsible party name: Rockville
Address: 600 Bayview Ave.
Entrance A
Inwood, NY 11096
Hereby declares that the Rockville PT65BR Wake Tower Speaker complies with FCC rules as mentioned in the following paragraph:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip­ment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica­tions. However, there is no guarantee that interference will not occur in a particular installa­tion. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RockvilleAudio.com
©2021 ROCKVILLE // The information presented is subject to change and/or improvement without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>