ROCKVILLE 6.5″ Marine utv/ATV Roll Bar/Wake Board Tower Speaker User Manual

UT65B
6.5′ MARINE UTV/ATV ROLL BAR/
WAKE BOARD TOWER SPEAKERS
OWNER’S MANUAL

WHO READS MANUALS?

Instead, go to vimeo.com/503132576 or scan the QR code and watch a short video that shows you how to set this item up and how to use it.
If you prefer written instructions, please read ahead! With Rockville, you get many options.

https://vimeo.com/503132576

Missing items? If you ordered a bundle that includes more than one product and you are missing part of your bundle then it just means your order shipped from two different warehouses. You will receive the remaining items very soon. If you have any concerns or inquiries, feel free to call our customer support center at 1-646-758-0144, Monday through Thursday, 9 am to 10 pm EST, and Fridays, 9 am to 3 pm EST.

Thank you for purchasing these Rockville UT65B roll bar/wakeboard tower speakers. Please read this owner’s manual carefully for proper use of your UT65B. Should you need assistance, please call our technical helpline at 1-646-758-0144, Monday through Thursday, 9 am to 10 pm EST, or Fridays, 9 am to 3 pm EST.
Includes

• Two tower speakers
• Mounting brackets and mounting hardware to fit 1.5″, 1.75″, 1.875″, or 2″
• Installation hardware
• Owner’s manual
• Warranty card

Parts list

Installation safety considerations
Please remember that these are heavy products that will be installed in a boat. These vehicles can travel at high speeds and be unstable, so please keep this in mind and use extreme caution.

• Do not mount the speaker in a location where someone could either walk into it or strike their head. During a turbulent ride, please make sure that you do not lose footing and fall or hit the unit as it may cause injury.
• Secure the wires to the speaker in multiple locations along the route to the audio source so there are no hanging wires.  Having nonsecure wires, especially in low light conditions, can cause entanglement and injury.
• Make sure to use the included rubber inserts when securing the speaker to the wake tower. Do not overtighten the clamp.  After installation is complete, and before operating your vehicle or vessel, please check all bolts to ensure they are completely tightened.
• Do not install these speakers where they may block the view of the operator or prevent safe operation of the vehicle or vessel.

Installation

The two screws can be unbolted to loosen the metal base of the mounting ring to adjust the mounting angle. Make sure to put all  components of the mounting hardware in a safe location

After loosening the two screws and determining the optimal angle for your speakers on the mounting bar, tighten the two screws in place to secure the metal base of the mounting ring tightly

place the front rubber pad on the metal base of the mounting ring

Place the supplied rubber strip around the cage bar to prevent scratching. Push the aluminum ring over the cage bar. Align the aluminum ring over the cage bar. Align the aluminum rings with the metal base of the mounting rings on the wake tower speaker.

Secure the aluminum rings to the metal base using a pair of M6 x 60mm screws, M6 flat washers, and M6 locknuts as illustrated. The locknut should be installed into the hex-shaped recess on one end of each ring. Do not overtighten. To change the position of the speaker loosen the screws, adjust the speaker, then retighten the screws.

UT65B wake tower speaker installation completed

Speaker Dimensions

Features:

• Rockville UT65B 6.5″ Marine UTV/ATV Roll Bar/ Wakeboard Tower Speakers
• Peak Power Handling: 400 Watts
• RMS Power Handling: 100 Watts
• Heavy-duty ABS enclosure
• IPX6 Water resistance rated
• Marine-grade components are protected from the elements
• Adjustable aluminum mounting bracket is strong and sturdy
• Bracket swivels 360 degrees for quick and easy speaker angle adjustment
• Bracket supports any rollbar from 1.5″ to 2″ thick
• 6.5″ woofers with 11 oz magnets and oversized 1.25″ Kapton voice coils
• 1″ PEI dome tweeters with neo magnets
• Shallow enclosure design is perfect for UTV, ATV, and marine applications
• Fully marinized against salt and freshwater conditions
• Completely resistant to water, rust, and UV rays
• Terminals are sealed with rubber gaskets
• Polypropylene-mica-injected cone with butyl rubber surround
• Frequency Response: 60Hz – 20KHz
• SPL: 87dB @ lw/lm
• Impedance: 4 Ohms
• Shockproof design
• ABS weather-resistant grills and hardware
• Color: Black
• Dimensions (H x W x D): 9.8″ x 7.17″x 7.52″RockvilleAudio.com
  02021 ROCKVILLE // The information presented is subject to change and/or improvement without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>