RAZER Blackwidow Chroma V2 Firmware User Guide

RAZER Blackwidow Chroma V2 Firmware Installation Instructions

UPDATER INFORMATION

APPLICABLE MODEL NUMBERS

• RZ03-0170

DRIVER NAME AND VERSION

BlackWidow Chroma V2_FirmwareUpdater_v1.01.00_r2.exe

Download Link: https://rzr.to/axKmO

RELEASE NOTES:

• Same as v1.01.00
• Addresses a compatibility issue of the old updater with the new Windows RS5 updates

PREPARATIONS

1. Make sure your laptop is plugged into a wall outlet and not just running on battery before proceeding.
2. Save any open documents on your computer and close all other programs before attempting the update.
3. Download the firmware from the link above.
4. Run the updater and follow the installation steps below:

INSTALLATION PROCESS

1. Download the firmware update by clicking the link found above.

2. Close Razer Synapse and all other running applications before proceeding with the update.

3. Run the downloaded firmware. If you have already closed all running applications, click “OK” to proceed.
   

4. Connect the device and click UPDATE.
   

5. Wait for the update to complete.
   

6. Once the firmware has been successfully applied, click “CLOSE” to exit the installer.
   

FOR GAMERS. BY GAMERS.™

References

• rzr.to/axKmO

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>