RAZER Viper 8khz Firmware Installation Guide

RAZER Viper 8khz Firmware

UPDATER INFORMATION

APPLICABLE MODEL NUMBERS

• RZ01-03580

DRIVER NAME AND VERSION

Viper 8KHz_MouseFirmwareUpdater v1.02.00_r1.exe
Download Link: https://rzr.to/etK7a

RELEASE NOTES:

1. Fixed an issue where the mouse is not detected by PC after restart.

PREPARATIONS

1. Make your laptop is plugged into a wall outlet and not just running on battery before proceeding.
2. Save any open documents on your computer and close all other programs before attempting the update.
3. Download the firmware from the link above.
   Note: It is recommended to download and install the latest firmware version.

INSTALLATION PROCESS

1. Run the updater as shown below:
   

2. You may be prompted to confirm changes on your device by the User Account Control. Click “Yes” to confirm these changes.
   

3. Click “NEXT” to proceed. The installer will close all running Razer applications if you have not done so yet.
   

4. Connect the device to the computer and then click “UPDATE”.
   
   5. Wait until the update process is complete. Do not interrupt. f :
   
   6. Your device has been updated to the latest firmware. Click “CLOSE”.
   

References

• rzr.to/etK7a

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>