MOZA Mini MX Gimbal for Smartphone User Manual
- June 7, 2024
- Moza
Table of Contents
Mini MX Gimbal for Smartphone
User Manual
Mini MX Overview Phone Holder
Note: Please activate MOZA Mini MX with MOZA Genie App before the first use. Otherwise, normal working functions may be limited.
Download APP
You can scan the QR code to download the “MOZA Genie” directly, or you can
search the “MOZA Genie” in the APP store & Google Play to download it.(scan
the QR code below to download the APP)
1. The customized “MOZA Genie” APP for Mini MX can help you make better use of the various functions of the gimbal. 2. Please routinely check for the latest version of the MOZA Genie app. Make sure you have set to automatic update on your mobile smartphone.
Mounting and Balancing Folded Status
Unlock the gimbal as shown in illustration Place the mobile phone in the phone holder with its camera facing outwards. Adjust the phone holder to keep the phone leveled in a natural state.
Charging
- The MOZA Mini MX has a built-in lithium battery. Before first use, fully charge it to condition the battery to ensure smooth operation.
- When the power indicator starts flashing, the battery level is less than 20%. Please charge it in time.
- With a universal Type-C port, Mini MX can be charged by both phone charger and power bank.
- The battery will automatically stop charging when it gets fully charged. The blue indicator light will turn off. Please disconnect the charger.
Battery Level Indicators
- All blue LEDs on 70%-100% battery level
- Two blue LEDs on 40%-70% battery level
- One blue LED on: 20%-40% battery level
- Blinking: below 20% battery level
- Blue light blinks: Charging
- Blue light off: Charging completed
Connecting to the MOZA Genie App
Refer to the illustration on page P2 installing the phone and balancing the gimbal. Long press the function button for 3s to power on the gimbal, turn on the Bluetooth of the phone, launch the MOZA Genie App. Click the Bluetooth icon in the main interface of MOZA Genie App to search for connectable devices select the device with the connection prefix as Mini MX. After successful connection, the gimbal will automatically enter the shooting interface.
Mini MX Activation
Enter the APP main interface to select the gimbal to be connected, the
activation prompt box will pops up, click Activate. After the activation is
completed, the gimbal will work normally. If activation fails, please try to
reactivate, if it fails again, please follow the prompts to contact customer
service.
Button function (MOZA Genie App Control)
Fn button Long press: on/off Power on and enter standby mode (phone not
clipped/unlocked) Single press: shutter; record / stop Wake up (gimbal in
standby mode) Double press: switch to video mode/photo mode Triple press:
Horizontal and vertical mode switching
Joystick
Move upwards: phone camera goes up Move downwards: phone camera goes down Move
leftwards: phone camera goes left
Move rightwards: phone camera goes right Inception mode: Move leftwards, roll
axis rotates counterclockwise Move rightwards, roll axis rotates clockwise
Zoom + Click and hold: Zoom in Single press: Pan-tilt follow Double click:
Automatically zoom in to maximum
Zoom Press and hold: Zoom out Single press FPV Mode Double click:
Automatically zoom out to minimum Inception Mode:Push the joystick left and
right in FPV mode to control the rotation direction
Smart Trigger
Click and hold: All Lock Mode Double click and hold: Sport Gear Mode Click:
Follow the center of the shot intelligently Double click: Re-center and exit
the current mode Triple Click: Switch between the rear and front-facing camera
Note: Mini MX is able to use your smartphone’s original camera to take photos,
record/stop. However, featured modes of the above functions cannot be
controlled without the app. It is recommended to use the MOZA Genie App. When
connected to the app, a notification will appear to let you know which mode
was switched to.
Firmware upgrade
Hold the ZOOM- button then click the Fn button at the same time, the indicator
flashes from top to bottom. Then the stabilizer enters, the stabilizer enters
the firmware upgrade mode, connect the APP, and click firmware upgrade.
Bluetooth reset
When you cannot search for Mini MX Bluetooth on your phone, please power on
the gimbal, hold + button, then press the power button at the same time until
the power
indicator flashes. Then the Bluetooth reset is successful.
Product Specification
| Payload | 280g |
|---|---|
| Weight | 412g |
Gimbal Dimensions
(LWH mm)
|
UnFolded:120120265
Folded:14550180
Supported Phone
|
Width:60 ~ 88mm
Weight:143~280g
Battery Life|
24 h(Reference battery life under
test with gimbal well balanced.)
Battery Specs
|
Working votage: 7.4V
Battery capacity: 2000mAh
Charging Time| 2.5-Hours
Mechanical Range
| Pan:340°
Roll:300°
Tilt:140°
FAQ
1. Why does my gimbal
automatically enters
sleep mode after a short
while of usage?|
-
Make sure you’ve installed your
phone, and check whether the
mobile phone is well balanced.
Serious unbalance will cause
motor overload and goes to sleep
to protect it. -
Please have a check whether
the indicator flashes quickly, if it
does, it means low battery and
the gimbal can not work.
---|---
2. Does the gimbal
support fast charging?|
Fast charging is not supported,
the charging specification is
5V/2A
3. What can I do if there
is a delay in the
movement and video in
my App?|
-
Check whether the anti-shake
function is turned on in the App, if it is, please turn off the anti-shake function. -
If the delay still exists after you
turned off the anti-shake function,
please uninstall the App and
download it again. If the problem
still exists, please contact our
after-sale service.
4. What should I do if ×
appears after I opened
the App and searched
Bluetooth?|
Close Bluetooth search box in the
MOZA genie app, then re-open
the search box and search again
the Bluetooth device, try to
connect again.
5. What should I do if the
Object Tracking fails?|
-
Please try to select a target of a
suitable size in a single
background environment. the
screen and be clearly visible
without any foreground objects. -
If it still doesn’t work, please try to
upgrade the App and gimbal
firmware. -
6. What is Magic Mode?
|
-
The Magic Mode in MOZA Genie
App provides some cool short clips
filmming templates, you can easily
shoot several clips by following the
templates. -
The Magic Mode guide you
record and filming from three
aspects including “camera
movement”, “transition”, “sound
effect” to achieve “one step filming”. -
You just need to hold a button to
start shooting, the gimbal will
automatically move according to
the scene’s requirements, and some
may provide tips to users on
following the camera movement.
7. What should I do if
the indicator light is
not on and I can’t turn
the gimbal on due to
upgrade failure?|
When upgrade failure happens,
please force your gimbal enter
firmware upgrade mode (also
called boot mode, hold zoombutton
then press fn button) and
upgrade firmware again.
8. How to operate the
Inception Mode?|
-
Press Zoom- to switch to FPV
Mode -
Move the joystick left and right
to proceed the operation for
Inception Mode.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>