ANKER A2620222 PowerPort mini User Manual
- June 7, 2024
- Anker
Table of Contents
USER MANUAL
PowerPort mini
Using Your Product
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Attention
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during the use of the appliance must not exceed 35°C.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by an AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions: (1) This device may not
cause interference, and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2620 is in
compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.anker.com
Anker Technology (UK) Ltd: Suite B, Fairgate House, 205 Kings Road, Tyseley,
Birmingham, B11 2AA, United Kingdom Anker Innovations Limited: Room 1318-19,
Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker
Innovations Deutschland GmbH: Georg-Muche-Strasse 3-5, 80807 Munich, Germany
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2620 is in
compliance with Electrical Equipment (Safety) Regulations 2016 &
Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010.
The full text of the GB declaration of conformity is available at the
following internet address:
https://www.anker.com.
Specifications
| Input | 100-240 V ~ 0.5 A 50-60 Hz |
|---|---|
| USB Output | 5.0 V 2.4 A 12.0 W (2.4 A Max Per Port) |
| Average active efficiency | 83.40% |
| Efficiency at low load (10%) | 81.60% |
| No-load power consumption | 0.066 W |
Customer Service
Lifetime technical support
Please note that your rights under applicable law governing the sale of
consumer goods remain unaffected by the warranties
given in this Limited Warranty.
18-month limited warranty *
support@anker.com
+1 (800) 988 7973 Mon – Fri 9:00am – 5:00pm (PT)
For FAQs and more information, please visit:
anker.com/support
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP
@anker_official
@anker_jp
roduct Number A2620
51005001735 V05
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>