ANKER 41698 PowerSolar 3-Port 100W User Manual
- June 7, 2024
- Anker
Table of Contents
ANKER 41698 PowerSolar 3-Port 100W User Manual
Using Your PowerSolar
-
Unfold PowerSolar, use the legs① to support it, use the Suncast② to align directly to the sun, and when the shadow of the blue dot is in the red circle, PowerSolar will capture direct rays for a maximum charge.
-
Charge your phone and tablet using the USB-A or USB-C port. Charge your PowerHouse using the XT60 port. If PowerSolar is working correctly, the LED indicator will turn blue.
Note
- PowerSolar can’t store electricity directly. You will need a power bank or PowerHouse to store power or connect PowerSolar directly to your devices to charge.
- Charging efficiency is subject to sunlight intensity.
- Keep your phones and tablets away from direct sunlight. Excessive heat may cause damage.
- 100W refers to the power of the solar panel, which is not equal to the actual power of the output ports. There will be some power loss when solar energy is transferred into electrical energy, so the actual power of the output ports will be less than the power of the solar panel.
Specifications
Peak Power
|
100W
---|---
Power Voltage
|
18V
Power Current
|
5.55A
USB-A Output
|
5V 2.4A
USB-C Output
|
5V 3A
Size (folded)
|
525×470×85 mm
Size (unfolded)
|
1446×525×45 mm
Weight
|
5 kg
Important Safety Instructions
-
Avoid dropping.
-
Do not disassemble.
-
Do not expose to liquids.
-
For the safest and fastest charge, use original or certified cables.
-
Open flame sources, such as candles, must not be placed near this
product. -
Only use a dry cloth or brush to clean this product.
SAVE THESE INSTRUCTIONS
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radiofrequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973
IC Statement
This device complies with Industry Canada license-ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2431 is in
compliance with Directives 2014/30 /EU&2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2431 is in
compliance with Electromagnetic Compatibility Regulations 2016 & The
Restriction of the Use of Certain Hazardous Substances in Electrical and
Electronic Equipment Regulations 2012. The full text of the GB declaration of
conformity is available at the following internet address:
https://www.anker.com.
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan
Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807
Munich, Germany
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road,
Tyseley, Birmingham, B11 2AA, United Kingdom
Customer Service
**18-Month limited warranty***
Lifetime technical support.
(US) +1 (800) 988 7973 Mon-Fri 9:00 – 17:00 (PT)
(UK) +44 (0) 1604 936200 Mon-Sun 6:00 – 14:00
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
@anker_official / @anker_jp
@Anker Deutschland / @Anker Japan / @Anker
@AnkerOfficial / @Anker_JP
CHARGE FAST, LIVE MORE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>