DOMETIC Windows & Doors Blinds FP300 Installation Guide

June 7, 2024
Dometic

Dometic logo

DOMETIC Windows & Doors Blinds FP300

DOMETIC Windows & Doors Blinds FP300

© 2021 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The trademarks mentioned in this manual belong to Dometic Sweden AB. All rights are reserved.

Safety and installation instructions

Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all appli-cable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com, dometic.com

NOTE: If you do not have sufficient technical knowledge for installing the components in vehicles, you should have a specialist install the pleated front blind in your vehicle.

Please note the following:

  • During installation, do not damage any cables in the vehicle.
  • Do not obscure the windscreen while driving.

Scope of delivery

No. in fi g. 1 , Quantity Description
page 3  
1 1 Trim plate
2 1 Blind
3 2 Screw anchor 6GK
4 12 Bolt 3.5 x 13 mm
5 2 Guide rail
6 1 Drill template

Intended use

The Dometic windscreen blackout system FP300 (ref. no. 9104121168) is suitable for the windscreen of mobile homes of type Fiat Ducato type 250 from model
year 07/2006 and Fiat Ducato type 290 from model year 07/2014 as well as identically constructed Peugeot Boxers and Citroën Jumpers (without roof rack, without folding bed and without head airbag).
The Dometic windscreen blackout system FP300 is suitable for vehicles without interior mirror. The vehicles may have a rain sensor box or a camera sensor box.
This product is only suitable for the intended purpose and application in accordance with these instructions.
This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or mainte-nance will result in unsatisfactory performance and a possible failure.
The manufacturer accepts no liability for any injury or damage to the product resulting from:

  • Incorrect assembly or connection, including excess voltage
  • Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
  • Alterations to the product without express permission from the manufacturer
  • Use for purposes other than those described in this manual

Dometic reserves the right to change product appearance and product specifications.

Mounting the product

Diagram 1 Diagram 2 Diagram 3 Diagram 4 Diagram 5 Diagram 6 Diagram 7Diagram 8 Diagram 9 Diagram 10 Diagram
11

NOTE: To mark the holes for the blind, you can use the template that is included in the package.

Mount the blind as shown in the figures:
fig. 2, page 3 to fig. 0, page 7. fig. 3, page 4: Mounting without camera sensor box
fig. 4, page 4: Mounting with rain sensor box
fig. 5, page 4: Mounting with camera sensor box 1
fig. 6, page 5: Mounting with camera sensor box 2
fig. 0, page 7: The tension of the cord (2) can be adjusted by shifting of the brass eye (1).

Using the product

Closing the blind (fig. a, page 7)

  • Pull the blind with both hands up to the desired position.
    The two cords in the guide rails keep the blind in the desired position.

  • Guide the blind back into its holder slowly using both hands.

Cleaning and maintenance

NOTICE! Damage hazard
Do not use sharp or hard objects or cleaning agents for cleaning as these may damage the product.

  • Occasionally clean the product with a damp cloth.
  • To prevent material fatigue, do not keep the blind closed for an extended period of time.

Disposal

Place the packaging material in the appropriate recycling waste bins, wherever possible.

If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.

Warranty

The statutory warranty period applies. If the product is defective, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer).
For repair and warranty processing, please include the following documents when you send in the product:

  • A copy of the receipt with purchasing date
  • A reason for the claim or description of the fault

Dometic logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals