FOREVER KW-60 Call Me 2 Smartwatch User Manual

: June 7, 2024
: FOREVER

Table of Contents

FOREVER KW-60 Call Me 2 Smartwatch
Device description
Introduction
Specification
The set includes
Charging
Functions
Settings
TROUBLSHOOTING
Rules for safe use
Manufacturer’s data:
FAQS
VIDEO

FOREVER KW-60 Call Me 2 Smartwatch

Thank you for buying Setty brand product. Before use, read this instruction manual and keep it for future reference. Do not open the device on your own – any repairs should be carried out by a serviceman. Only use original parts and accessories supplied by the manufacturer. The device must not be exposed to direct fire or other heat sources. We hope that Setty will meet your expectations.

Device description

Speaker
Micro USB connector
Microphone
Camera
Answear the call / Turning on the flashlight (after pressing twice)
Flashlight
On/Off/SOS buton/Return to mine screen
Function touch button – return to the start screen

Parts Guide Parts Guide Continued

Introduction

Before using the kids watch, carefully read the instruction manual to ensure correct operation. Kids watch is a small telecommunication device, used to locate its position and send data. Operation of the device is based on GSM/GPRS mobile network. Important! The device requires installation of a micro SIM card with active service, allowing to make and receive calls, with no PIN lock. It is recommended to deactivate voicemail. When sending information regarding location, the watch will require access to mobile Internet, therefore, you should buy at least 1 GB package. Use of the watch may be associated with fees for using the network and calls, in accordance with the operator’s tariff

Specification

Display: 1.44’’ 128×128 px
Touch screen: yes
Standby time: do 2-3 days
Charging time: 2-3 hours
Strap length: 230 mm
Battery: 400mAh
Camera: yes
Microphone and speaker: built-in
Sim card: micro SIM (with no PIN lock)
Compatibility: Android ≥ 5.0 , iOS ≥ 10.0

The set includes

smartwatch
charging cable
user manual

Charging

It is recommended to use a charger of output parameters of 5V ⎓ 1A. Charger is not included in the set. Full charging time of the watch is approximately 2 hours. Open the plug protecting the micro USB port, then connect the included micro USB cable and connect the device to a power source.

Installing the SIM card Always make sure your watch is turned off before inserting or removing the SIM card. Never insert or remove the SIM card when the watch is turned on. Open the back cover of the watch by gently prying it at the top and sides until the latches are unfastened. Then remove the battery, taking care not to damage the battery cables. Remember its position. Open the micro sim card cover by sliding it slightly to the right, and then insert the SIM card into the slot in such a way that the sim card chip is facing upwards to the watch screen. Then close the lock by sliding to the left. Place the batteri in the watch in it original position, then close the back cover by pressing the latches.
First run After installing the SIM card in the watch and charging the device, you can start it by pressing and holding the on button.
- After starting, the watch connects to the mobile network.
Device operation We operate the device via a touch screen. By sliding your finger on the screen, you can switch between individual functions and you select a given function by pressing the screen.
- Device home screen showing the current date and time as well as battery level. On this screen, we also see the icon for connecting to the mobile network and the icon for the amount of contractual awards received.
- Enables you to make a phone call by manually entering the number.
- The phone book gives you access to 10 contacts defined using the application.
- Allows you to take a photo that will be saved in the album.
- Access to the last photo taken. Possibility to preview, send or delete it. Each subsequent photo taken overwrites the previous one.
- A simple math game with three levels.
- It allows you to send voice messages and receive text and voice messages.
- It allows you to start the flashlight built into the watch.
- It allows you to read the registration QR code for the device and the application QR code.
Use of application Download the „Forever Care” app for iOS or „Forever KidsCare” for Android.

Account and watch registration: In the registration window, enter your email address, password and the area of use of the watch. Then enter or scan the watch code (REG CODE) found on the bottom of the box and on the watch.

Functions

Chat: Send a text or voice message to the watch by typing it on the keyboard or recording it using the phone’s microphone. You can also listen to the voicemails sent from the watch here.
Route: select the date and time slot to display the traveled route.
Map: Select the map icon to view the current location of the watch.
Safety zone: designate a safety zone, when the watch will found outside the selected zone, you will receive a notification from the app.
Reward: Select the number of rewards you want to send to your child. After approval, the information about the award will be sent to the watch.
Alarm clock: alarm clock settings. Set the desired time and frequency of repeat.
Find Watch: Select a feature to find your device if it’s near you. The watch will ring to inform you of its location.
Notifications: This is where you get and preview any notifications and alarms you receive from the watch.
Remote camera: take a photo using the watch camera and receive it on your phone. The captured image appears after a certain waiting time, depending on the signal strength of the cellular network.
My profile:
- Personal data: Your account settings
- Device list: Add, edit or remove a connected devices
- Change Password: Change the password for your account.

Settings

SOS numbers: when the watch user presses and holds the SOS button, the watch makes an automatic emergency call to three contacts defined on list.
Voice monitoring: enter the phone number to be called from the watch in order to listen to its surroundings. Pick up the call and check what’s happening nearby. The user of the watch has no notification that such a call has been made.
Do not disturb: Select the time during the day when the user of the watch will not receive phone calls.
Location mode: select normal mode – refreshing the watch’s location once every ten minutes, power saving – once every hour, tracking – once every minute.
SMS notifications: enter the number to which you want to receive SMS notifications about events such as: low battery level in the watch, triggering the SOS alarm using the watch button.
Phone book: Define up to ten contacts that the watch user will have in the phone book.
Time zone: set your time zone than the device shows the correct date and time on.
Language: Choose language for your device from the available.
Settings switch: Enable or disable the watch function.
LBS Location: Enable or disable location using network operators antennas.
Turn off watch remotely: watch will be turned off.

TROUBLSHOOTING

The application does not receive commands and shows information that the watch is disconnected from the network.

Check whether GMS signal is correct– whether the range columns are available / visible on the display. – – – If they are crossed out, please turn off your watch.

Check if the SIM card is properly installed in the watch, if it supports 2G internet and if there is an internet data package available. Turn on the device. If the range columns are still crossed out, go to the next point.

Check if there are data transfer arrows, if not, set APN (Access Point Name – specific packet network, e.g. internet):

Please send a text message to the number of the watch with the content: pw,123456,apn, internet,,,XXXXX# * the X character stands for digits assigned to a specific operator

26003 – ORANGE 26001 – PLUS 26006 – PLAY 26002 – T-MOBILE

the remaining code digits are available on manual/forever.eu or www.mcc-mnc.com/ After sending the message, wait several minutes for KidsWatch to download the settings from the network. Data transfer arrows will appear.

Please send a text message to the number of the watch with the content: pw,123456,ts#, in response, the watch will send us the parameters of the watch. An example:
- ver:G36WS_YDE_V1.1_2019.12.19_09.45.40;
- ID: 1234567890;
- imei:123456789012345;
- ip_url:52.28.132.157;
- port:8001;
- upload:600S;
- bat level:96;
- language:1;
- zone:10.00;
- ec:0;
- NET:OK(73);

Check the data received in the SMS with the watch number

If the number ID/IMEI/REG CODE is different from the badge on the watch or the bottom of the package, set a new IMEI number.

Please send a text message to the number of the watch with the content: pw,123456,imei,xxxxxxxxxxxxxxx# where X are the numbers from the badge – the watch, after receiving the SMS with the code, sends back in the SMS response with the correct IMEI number, for example: pw,123456,imei,359614514986574# Attention when writing text messages, pay attention to punctuation marks and spaces. This is very important because if the characters are not used correctly, the commands will be misinterpreted by the watch and will remain unanswered. Could not call watch. The signal is busy or the subscriber does not answer Reason: The watch does not recognize the incoming number or the app is set to do „not disturb”. Solution:

Check if the number you are calling from is hidden number.
Check if there are contact numbers in the application.

The watch only receives calls from numbers previously set in the contacts of the application. The watch does not show the current time and date Reason: The watch did not connect to the application server to update the time. Solution:

If the watch shows several hours back, check and select the correct time zone via the app.

Rules for safe use

Read and keep this manual.
There are no user-serviceable parts inside. All repairs should be performed by a service technician.
Protect the device from contact with water and moisture to avoid damage to electronic parts. Avoid very high temperatures; they can shorten the life of electronic device components or melt plastic parts.
Note: Use only original parts / accessories provided by the manufacturer.
Follow the instructions in the manual. The product is not a toy.

The maximum radiated radio frequency power in the frequency range

Frequency range:| GSM 900/1800 MHz
Transmit power| 33,51/30,44dBm EIRP

Declaration of conformity with the directives of the Eutropean Union Declaration of conformity with the directives of the Eutropean Union TelForceOne Sp. z o.o. hereby declares that the Kids Watch Setty FunKid is in compliance with Directive 2014/53 / EU. The full text of the EU declaration of conformity is available at the following internet address: https://manual.setty.pl//FunKid

Manufacturer’s data:

ul. Krakowska 119 50-428 Wrocław, Poland Made in China CORRECT DISPOSAL OF USED EQUIPMENT The device is marked with a crossed-out garbage bin, in accordance with the European Directive 2012/19/ EU on used electrical and electronicEquipment (Waste Electrical and Electronic equipment – WEEE).Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use. The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling point in which dangerous waste are being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources. Proper disposal of used electrical and electronic equipment is beneficial to human health and environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or point of sale, where the equipment was purchased. CORRECT DISPOSAL OF USED BATTERY According to the EU directive 2006/66/EC with changes contained inEU directive 2013/56/UE on the disposal of batteries, this product is marked with crossed-out garbage bin symbol. The symbol indicates that the batteries used in this product should not be disposed with regular household waste, but treated according to the legal directives and local regulations.It is not allowed to dispose of accumulators with unsorted municipal waste. Users of accumulators must use the available collection points of these items, which allows them to return, recycle and dispose of the accumulators. Within the EU, the collection and recycling of batteries and accumulators is a subject to separate procedures. To learn more about existing procedures of recycling of accumulators please contact your local office or an institution for waste disposal or landfill. www.forever.eu Compliance
Symbols

FAQS

Can smartwatches work without internet?

If your watch & phone aren’t connected over the Internet
You won’t be able to use voice actions, but you can still use some basic features on the watch: Tell time and display the date. Set an alarm. Use the stopwatch.

Can a 7 year old have a phone?

Cheng says his advice for younger kids also applies to this age group: no phones. However, if some parents want their kids to have phones to keep in touch when they’re away from home, he says an old-school flip phone without Internet access will do just fine.21-Mar-2018

Is Just talk kids free?

The kids’ version has no ads or in-app purchases and is free, unlike the adult version, which requires a paid subscription to remove ads and add additional features.

Do you need SIM card with kids smart watches?

However, one of the issues with these watches is that they require a SIM card for internet connectivity for GPS location and the ability to make and receive calls and SMS. Quite often, SIM plans can be expensive but with Cmobile, we have a range of low cost plans that can help keep your child connected at a low cost.

Do kids smart watches need a SIM?

All kids phonewatches will need some sort of connection to the outside world in order to be contactable and tracked using GPS geolocation. This will usually be a SIM card provided by a mobile network such as ParentShield.

Does a kids smartwatch need a SIM card?

Most smartwatches don’t require a SIM card because they connect to your phone, usually via Bluetooth, and use it to access the mobile network. However, if you’re looking to equip your child with a smartwatch that supports GPS, so you can use it as a location tracker, then you’ll want a SIM card.

Does a kids smartwatch need a SIM card?

JusTalk Kids is a SAFE video calling and messaging app designed for kids to connect with family and close friends from their tablets or smartphones. – NO harassment from strangers.

What app can kids use to call?

The kids’ watch phone allows parents to make calls and send text messages, making communication fast and convenient. Since most kids smartwatches are easy to use, both kids and parents will enjoy voice calling and text messages.

Does Apple have kid watches?

The Apple Watch gives kids a way to stay in touch with parents, share location, and build responsibility without the full cost and risk of a smartphone

Which kids apps work offline?

Best Offline Apps for Kids | Games

Toca Life: Vacation. (Android, iPhone, iPad) …
PlayKids – Learn Through Play. (Android, iPhone, iPad) …
TinyTap Educational Games. (Android, iPhone, iPad) …
Epic! Books. …
Khan Academy Kids. (Android, iPhone, iPad) …
Minecraft: Pocket Edition. (Android, iPhone, iPad) …
Sago Mini World: Kids Games.

Can a 12 year old watch a 6 year old?

In general, kids can start babysitting siblings for short periods around age 11 or 12. Start by leaving them for short amounts of time and gradually increase it as they prove themselves trustworthy. Don’t leave them alone overnight until your oldest child is at least 16.

Do all smartwatches have cameras?

Well, smartwatches have evolved quite a lot, and they now even come with in- built cameras also. That said, if you are interested in buying one for yourself, we have shortlisted some of the best smartwatches with cameras from the market for you.

Does just talk kids need Wi-Fi?

JusTalk Kids allows kids to video call and message using Wi-Fi so they don’t need a phone number. Parents can get their child started with safe video chat & messaging in three steps. Download the JusTalk Kids app to your child’s phone or tablet.

Does every smart watch need a SIM card?

If you have a standalone smart watch or don’t want to use your smart phone cellular network or WiFi, your smart watch will need a SIM card for connectivity

Do smartwatches work without a phone?

You can use your Galaxy Watch Active without connecting to a mobile device, making it easier to use with outdoor activities like running, hiking and mountain climbing. You can setup the Galaxy Watch Active without a mobile device when it is turned on for the first time or after it has been reset.