ANKER A83650A1 PowerExpand 6-in-1 USB-C 10 Gbps Hub User Manual

June 7, 2024
Anker

ANKER logo

ANKER A83650A1 PowerExpand 6-in-1 USB-C 10 Gbps Hub

ANKER A83650A1 PowerExpand

Safety

  • The maximum operating temperature is 40℃.
  • Do not expose to rain, moisture, or snow.
  • Use of an attachment not recommended or sold by the manufacturer may result in a risk of fire, electric shock, or injury to persons

At a Glance

Overview

1. USB-C connector Connect to a MacBook’s USB-C port
2. HDMI port Connect to a device with an HDMI port to stream video at

resolutions up to 4K@60 Hz
3. SD card slot| Insert an SD 4.0 card to copy files to and from your MacBook
4. PD-In put| Connect to a PD charger to charge your laptop or tablet Up to 100W input
5. USB-A port| Connect to a USB-A device to support data transfer at speeds up to 10 Gb/s
6. Power indicator| Turns white when powered on
7. Audio port| Connect to earphones or other devices with a 3.5 mm connector

Specifications

Supported Systems| Windows 7/Windows 8/Windows 10,Mac OS 10.6 or later, Chrome OS
---|---
Data Speed| 10Gb/s
SD 4.0 Card Slot| 312Mb/s
HDMI| For computers supporting DisplayPort 1.4: Up to 4K@60Hz for a single display.

For computers supporting DisplayPort 1.2:

Up to 4K@30Hz for a single display.

DisplayPort 1.4

Important Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Do not expose to liquids.
  • For the safest and fastest charge, use original or certified cables.
  • This product is suitable for moderate climates only.
  • The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
  • Open flame sources, such as candles, must not be placed near this product.
  • Only use a dry cloth or brush to clean this product.
Declaration of Conformity

Hereby, Anker Innovations Limited declares that the product type A8366 is in compliance with Directive 2014/30 /EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/products
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
https://www.anker.com

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Customer Service

18-Month Limited Warranty
Lifetime Technical Support
support@anker.com
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)

Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.ANKER logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals