ANKER A8394 PowerExpand 9-in-1 USB-C PD Dock User Manual

June 7, 2024
Anker

ANKER A8394 PowerExpand 9-in-1 USB-C PD Dock User Manual

Important Safety Instructions

  1.  Avoid dropping.
  2. Do not disassemble.
  3.  Do not expose to liquids.
  4.  For the safest and fastest charge, use original or certified cables.
  5.  This product is suitable for moderate climates only.
  6.  The maximum ambient temperature when using this product must not exceed 104°F / 40°C.
  7. Open flame sources, such as candles, must not be placed near this product.
  8.  Only use a dry cloth or brush to clean this product.

System Requirements

Compatible Device s
MacBook Air 2020/2019/2018, MacBook Pro 2020/2019/2018/2017/2016;
XPS, Inspiron 7000, Latitude 7000/5000; EliteBook; Yoga X1/C900/C700,
ThinkPad X390/T490/T590; Swift 7/5/3, Spin 7/5/3; ZenBook Pro Duo;
NoteBook 9 Pro, NoteBook 9 Pen, NoteBook 9
*The USB-C ports of host devices must support Power Delivery and
DisplayPort Alt Mode.
Compatible Operating Systems
macOS 10.12 or later, Windows 8/10, iPadOS

What’s in the Box

USB-C Dock
USB 3.1 C-C Cable 1 m
100W Power Adapter
Power Cord
Manual
Quick Start Guide
Happy Card

At a Glance

angker

  1. Kensington security slot
  2. Power Button
  3. LED Indicator
  4. Audio In and Out
  5. USB-A 3.1 Gen 1 Port (5 Gbps, 5V/1.5A)
  6. USB-C 3.1 Gen 1 Port (5 Gbps, PD 20W)
  7. USB-C Upstream Port (5 Gbps, 60W)

anker parts

  1. DC-IN (100W)
  2. HDMI Port (4K@60Hz)
  3. DP Port (4K@60Hz)
  4. 2*USB-A 2.0 (480 Mbps, 5V/0.5A)
  5. Gigabit Ethernet

Using Your USB-C Dock

Power on Your Dock
1.Plug one end of the included power adapter into the DC-IN port and the other into a power outlet.
2.Press the power button. The LED will turn green.

power dock

Connect the Dock to Your Laptop
Connect your laptop to the dock’s USB-C upstream port using the provided cable to access pass-through charging for laptops at a maximum output of 60W.

connect dock

LED Indicator Guide

LED indicator

|

Description

---|---

Solid green

|

Powered on

Solid blue

|

Connected to your laptop

Off

|

Powered off

Port Overview

USB-C 3.1 Gen 1 Port
Can be connected to USB-C compatible devices, such as an SSD (solid-state drive) or other USB storage device to provide data transfer speeds of up to 5 Gbps. Also compatible with Power Delivery 3.0 20W to charge your phone or tablet.

port overview

USB-A 3.1 Gen 1 and USB-A 2.0 Ports
Charge iWatch and other accessories using USB-A 3.1 Gen 1 port(BC1.2, 7.5W). Transfer data at 5 Gbps via the USB 3.1 Gen 1 port, or at 480 Mbps via the two USB-A 2.0 ports. These ports can also be used to connect to USB devices, including USB keyboards, mice, or storage devices.

gen port

Ethernet Port
Connect the dock to a router or modem at 10/100/1000 Mbps using an Ethernet cable.

ethernet port

Audio Jack
Connect earphones or other devices with a 3.5 mm AUX connector.

audio jack

Connect the Dock to One or Two Monitors
Connect the dock to up to two monitors via one HDMI port and one DP port.
With an HDMI port, you can connect to a monitor to stream video at resolutions up to 4k@60Hz.
The following table lists the supported resolutions. The resolution may vary depending on your monitor.

DisplayPort 1.4 Platform

Item

|

HDMI

|

DP

---|---|---

Single Display

|

3840×2160@60Hz

|

/

/

|

3840×2160@60Hz

Dual display

|

3840×2160@30Hz/ 2560×1440@60Hz

|

3840×2160@30Hz/

2560×1440@60Hz

DisplayPort 1.2 Platform

Item

|

HDMI

|

DP

---|---|---

Single Display

|

3840×2160@30Hz/ 2560×1440@60Hz

|

/

/

|

3840×2160@30Hz/

2560×1440@60Hz

Dual display

|

1920×1080@60Hz

|

1920×1080@60Hz

If you’re using a Windows laptop, the supported displays are as follows:

support displays
If you’re using a MacBook, the supported displays are as follows:
macBook

Package Dimensions and Weight

Size 145 × 65 × 24 mm / 5.7 x 2.6 x 1.0 in
Weight 188 g / 6.64oz

Trademarks

The Adopted Trademarks HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

NOTICE

FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

The following importer is the responsible party:
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone:1-800-988-7973
Declaration of Conformity
Hereby, Anker Technology Co., Limited declares that the product type A8394 is in compliance with Directives 2006/1907/EC & 2014/30/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.anker.com

GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A8394 is in compliance with the following Directives:
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012
Electromagnetic Compatibility Regulations 2016
The full text of the GB declaration of conformity is available at the following internet address:
https://www.anker.com
Anker Technology (UK) Ltd | Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United Kingdom
Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals