Harley Benton ISO-1 AC Pro Modular Isolated Output Power Plant User Guide
- June 7, 2024
- Harley Benton
Table of Contents
Harley Benton ISO-1 AC Pro Modular Isolated Output Power Plant User Guide
This quick start guide contains important information on the safe operation of the product. Read and follow the safety a devices and instructions given. Retain the quick start guide for future reference. If you pass the product on to others please include this quick start guide.
Safety instructions
Intended use
This product is meant to be used as a multiple power supply for effect pedals.
Any other use or use under other operating conditions is considered to be
improper and may result in personal injury or property damage. No liability
will be assumed for damages resulting from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that
children do not detach any small parts from the product. They could swallow
the pieces and choke! Never let children unattended use electrical devices.
Where to use the product
Never use the product
- in conditions of extreme temperature or humidity
- in extremely dusty or dirty areas
- at locations where the unit can become wet
General handling
- To prevent damage, never use force when handling the product.
- Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use liquid cleaners such as benzene, thinners or flammable cleaning agents.
Features
- Multiple modular power supply for effect pedals
- 5 isolated, filtered and short-circuit proof outputs eliminate noise and hum
- High current output for modern digital effects
- LED indicator on each output
- Universal input voltage operation 100 – 240 V
- Compact, robust aluminium housing, can be used on or under pedalboards
- Outputs 1 – 5: 9 V @ max. 500 mA ( , individually isolate)
- Modular AC main output allows the connection of two or more devices via a kettle socket-to-plug cable (included in delivery)
- Max. output current: 4 A
- Dimensions (W × H × D): 130 mm × 35 mm × 88 mm
- Weight: 400 g
- Ambient conditions: Temperature range 0 °C … 40 °C
Relative humidity 20 % … 80 % (non-condensing)
Scope of delivery
- 5 × DC cable 60 cm 5.5 × 2.1 mm straight to angled plug
- 1 × power cord with EU plug, 1.2 m length
- 1 × Kettle cable socket-to-plug
Operating elements
- Outputs 1 – 5 with each 9 V @ 500 mA
- Control LED for outputs 1 – 5, lights up green when voltage is present, turns off when output is deactivated due to overload
- Power cord connector
- Mains cable connection for the power supply of another device
Using the product
-
To put the device into operation, use the supplied power cord to connect the INPUT connector on the side of the device to a properly wired power socket, that provides supply voltage in the above mentioned range.
-
Use suitable voltage supply cables to connect effect pedals or similar devices which require 9 V supply voltage at a maximum of 500 mA to outputs 1 – 5.
The maximum output power of 22.5 W must not be exceeded.
Danger of property damage by polarity reversal
Make sure that the polarity of the devices to be connected must be the same as the polarity of the power supply outputs .
To power a device with polarity-reversed voltage may damage it! -
Each operational output is indicated by a green LED. If an output is switched off due to overload, the LED turns off. Then disconnect the pedal in question from the device. After approx. 2 seconds, the normal voltage supply is restored here.
-
To supply another device with mains voltage use the supplied Kettle cable to connect it to the OUTPUT connector on the side of the device.
-
To switch off the device, disconnect the power cord from the mains.
For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose of your old device with your normal household waste. Dispose of this product through an approved waste disposal firm or through your local waste facility. Comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>