Xiaomi Mi 20W Wireless Charging Stand User Manual
- June 7, 2024
- Xiaomi
Table of Contents
Xiaomi Mi 20W Wireless Charging Stand
Read this manual carefully before use, and retain it for future reference.
Product Overview
The Mi 20W Wireless Charging Stand is a universal charging product that
functions with wireless fast charging and supports horizontal and vertical
device placement. By connecting its USB-C port with the USB cable, you can
wirelessly charge your devices just by simply putting them on the stand’s
surface.
Instructions
-
Use the included genuine charger and USB cable to connect this charging stand to a power supply. Once connected, the LED indicator blinks green three times, then you can wirelessly charge your devices on the charging stand.
Adapter Requirements:- a. 5 V/1 A adapters are not supported.
- b. 5 V/2 A adapters support 5 W wireless charging.
- c. QC2.0/QC3.0 (18 W and above) adapters support 10 W wireless charging. *
- d. QC3.0 Class B (27 W and above) adapters support 20 W wireless fast charging.
-
- Your mobile phone is required to support 20 W fast charging.
- Place a Qi-compatible device in the center of the wireless charging stand to start charging automatically. When the charging stand is in its normal state, the LED indicator is green.
- Keep your device centered on the wireless charging stand when charging wirelessly. If the device does not begin charging right away, adjust the device’s position until its charging icon appears (refer to the figure below for proper device placement).
- When the LED indicator is blinking green, the wireless charging stand has encountered an error and protective measures have been activated. Please check whether any metal objects have been placed on the charging stand. If so, please remove them and check whether the charging stand resumes charging. If the problem persists, please contact the after-sales service department.
Precautions
- When using the charging stand to wirelessly charge a device with a protective case, make sure the case is non-metallic and has a thickness of 4 mm or less.
- Do not expose the charging stand to pressure or impact.
- Do not disassemble or modify the charging stand.
- Keep the charging stand away from fire and do not immerse it in water.
- Do not use this charging stand in severely hot, humid, or corrosive environments so as to avoid damage to its electrical circuit.
- Do not place any cards with a magnetic stripe or chip (such as an ID or bank card) near or on the charging stand to avoid corrupting the card.
- Keep a distance of at least 20 cm between implanted medical devices (such as pacemakers, cochlear implants) and the charging stand so as to avoid potential interference with the medical devices.
- The charging stand is not a toy. Keep it away from children.
- In order to achieve a better charging performance, please avoid using it in places with high temperatures or lack of heat dissipation, such as on bed sheets or mouse pads.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
CE
Hereby, Zimi Corporation declares that the radio equipment type Mi 20W Wireless Charging Stand is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
Specifications
- Name: Mi 20W Wireless Charging Stand
- Model: WPC02ZM
- Input Port: USB-C
- Input: 5 V=2 A 9 V=1.6 A 12–16 V=1.7 A Max.
- Output: 20 W Max.
- Transmission Distance: Up to 4 mm
- Operation Frequency: 110–148KHz
- Operating Temperature: 0°C to 35°C
- Item Dimensions: 109.7 × 91 × 91 mm
For further information, please go to www.mi.com
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zimi Corporation (a Mi Ecosystem company)
Address: A913, No. 159 Chengjiang Road, Jiangyin, Jiangsu, China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>