XIAOMI TWSEJ04LS True Wireless Earbuds Basic User Manual
- June 7, 2024
- Xiaomi
Table of Contents
Mi True Wireless Earbuds Basic
User Manual
**Product Overview
**
Charging Case
Earbuds
The earbuds come with the size M of ear tips installed, you can switch to size S or Lif the installed size does not suit your ear.
Wearing
Gently insert the earbud into the ear canal, make sure it is not easy to sway when shaking your head.
Please pay attention to adjust the ea thud to expose the
microphone during calls.
During calls. point the earbud’s microphone toward your mouth to make the call
dearer.
**Charging
**
Before using the device, please tear off the protective film from the earbuds’ contact points to fully charge them and their charging case.
Connect the charging cable to charge the earbuds and the charging case simultaneously. When the charging case is n of fully changed, its in-indicator is red. When fully charged its indicator is off. The indicator is red while ch a raging, and changes to white once fully charged, then goes off after 1 minute.
Turning On
Once you remove the earbud from the charging case, it automatically tums on. In case of the earbuds are not in that ging case and turned off, press and hold the multi-function button for 1 second till the indicator turns white.
Turning Off
Once you place the ear bud into the charging case, it automatically turns off. When the earbud is turned on, press and hold the multi-function button for 5 seconds till the indicator turns red.
Dual Earbud Usage
Automatic Connection: Remove both earbuds from the charging case
simultaneously, and wait 2- 3 seconds for the earbuds to automatically turn
on.
When the indicator of the right earbud slowly blinks white, you can search for
*Mi True Wireless EBs Basic R’ in the Bluetooth settings of your device. If
you cannot pair the earbuds, place them back in the case and repeat the
previous steps. After successfully pairing for the first time, the earbud will
automatically connect to the previously paired device (the Bluetooth is
enabled) when it is turned on.
Note: A-II earbuds have been preset at the factory, and can be paired
with a device directly.
indicator of the right earbud will
slowly blink white after the connection between the earbuds has been en est
abolished. E nable the Bluetooth of your device, then connect or pair your
device with earbuds.
Single Earbud Usage
Automatic Connection: Remove one earbud from the charging case, and wait for
the earbud to automatically tum on. The indicator of the earbud quickly blinks
white, then turns into slowly blinks white. Enable the Blu tooth of your
devices and search from True Wireless EBs Basic _R or Mi True Wireless EBs
Basic _L then pair your device with the right earbud or left earbud
correspondingly. After successfully pairing for the first time, the earbud
will automatically connect to the previously paired device (the Bluet ooth is
enabled d) when it is turned on.
Note: The left earbud (L) has a relatively long automatic connection
time.
Manual Connection: When the earbuds
are turned off, manually turn on one of the earbuds. When the indicator slowly
blinks white, enable Bluetooth of your device and pair the earbud with your
device.
Reset Earbuds
If the earbuds cannot connect properly, please try out the following steps to reset: Remove the earbuds from the charging case, and make sure they are turned off. Press and hold the multi-function button on both earbuds for about 15 seconds. After the indicator alternately blinks red and white three times twice, then release the button and place the earbuds back in the charging case. Delete the earbuds from the list of paired devices on your device, and then pair them with your device again.
Function Overview
The following functions can be used on both earbuds:
Answer/End calls
Gently press the multi-function button to answer/ end calls.
Reject a call
Press and hold the button for 1 second to reject a call.
Flay/Pause Music
While standby, gently presses the multi-function button to play/pause music.
Note: A music player needs to be running in the background.
Turn On Voice Assistant
While standby, press the multi-function button twice to turn on the voice
assistant.
Note: The function of voice assistant and quick wake-up must be supported
and enabled on your device.
Answer a Second Call/Switch between Call
is Upon incoming calls, gently press the multi-function button to answer the
call. During a call, gently press the multi-function button to answer the
second incoming call. Ge gently presses the multi-function button twice to
switch between the two calls.
Switch between Earbuds and Device
During a call, press and hold the multi-function button for 1 second to switch
between the earbuds and your phone.
Mute/Unmute
During calls, gently press the multi-function button twice to mute/unmute.
Features
| Bluetooth 5.0
---|---
| 2-in-1 storage and charging function
| Independent wireless design
Illustr actions of product, accessories, and user interface e in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.
Precautions
Warning
- Do not issue nide, repair, or modify the product for any reason, as this may cause fire or even completely destroy the product.
- Do not expose the product to environments where the temperature is too low or too high (below 0″C or above 45–C).
- Keep the product indicator away from the eyes of children and animals while in use.
- Do not use this product during thunders tom. Thunderstorms may cause the product to malfunction and increase the risk of electric
- Do not clean this product with alcohol or other volatile liquids.
- Avoid any contact with liquids.
- Excessive sound pressure from
Note
- If the product has not been used for more than 2 weeks, it is recommended to charge the product before use.
- Only use certified chargers supplied by qualified
- Continuous use of earbuds for a long time is detrimental to one’s hearing. Do not use the earbuds at a high volume for any extended
- Using earbuds n reduces the perception of external sounds. Do not use earbuds in environments that may threaten safety. It is recommended to only use a single earbud when
Specifications
Name: Mi True Wireless Earbuds Basic Model: TWSEJ04LS
Operating FP: +8.85 dBm
Max. Output Power 2402-2480 MHZ
Earbuds
Dimensions: 26.65 x 16.4 x 21.6 mm Net Weight: Approx. 4.1 g (per earbud)
Wireless R3rge: 10m (roan obstacle-free environment) Battery Capacity: 43 mAh
(per earbud) Charging lime: Approx. 1.5 h
Talk Time: Approx. 4 h
Standby Time: Approx. 150 h
Input: 5 V 00 mA
Battery Type: Lithium Polymer Wireless Connectivity Bluetooth 5.0
Bluetooth Profiles: HFP/A2DP/HSP/AVRCP
Charging Case
Dimensions: 62 x 40 x 271 mm
Input 5 V =500 mA
Output: 5 V t50 mA
Charging time: Approx. 2 h
Standby time: Approx. 4 months
Battery Capacity 300 mAh
Battery Type: Lithium Polymer
EU Declaration of Conformity Hereby, Liesheng Inc., declares that the radio
equipment type TWSE.I04LS is in compliance with Directive 2014/53/EU. The full
text of the E U declaration of conformity is available at the following
internet address: http://www.mi.com/global/service/support/declaration.html
CAUTION
RISK OF EXPL OS ION IF BATTERY IS REPLA CE D BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
To prevent possible hearing damage, do not listen to high volume levels for
long periods.
WEEE
All products bearing this symbol are e-waste electrical and electronic
equipment (WEE E as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your wart e equipment to a designated collection
point for the recycling of waste elect Rica I and electronic equipment,
appointed by the government or local authorities. correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as the terms and conditions of such
collection points.
For further information, please go to For further information, pleas e go to
www.mi.com
Manufactured or: Xiaomi Communication s Co., Ltd.
Manufactured by: Dongguan Yingsheng Electronic Technology Co., Ltd. (a Mi
Ecosystem company)
Address: Suite 1 304, 13/F, Project Phrase 2 of Gaos heng Tech Tower, Gao’s
heng Tech Park, No.5 Longxi Road, Zhouxi Community, Nanchen g District,
Dongguan, Guangdong, China.
Read this manual carefully before use, and retain it for future reference.
Documents / Resources
|
XIAOMI TWSEJ04LS True Wireless Earbuds
Basic
[pdf] User Manual
TWSEJ04LS, True Wireless Earbuds Basic
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>