BOSS MC720B Motorcycle Speaker User Manual
- June 7, 2024
- Boss
Table of Contents
**BOSS MC720B Motorcycle Speaker User Manual
**
Congratulations on your purchase of a BOSS Audio Systems amplified speaker
system. It has been designed, engineered and manufactured to bring you the
highest level of performance and quality, for years of listening pleasure.
Thank you for making BOSS AUDIO SYSTEMS your choice for entertainment!
Features
- Aux-In (3.5mm)
- Speaker Clamp Mounts
- Weatherproof Volume Control
- High-Impact, High Temperature Speaker Enclosures
- Weatherproof Speakers
- Bluetooth Audio Streaming
Operation Voltage
| 10-16 V
---|---
THD|
< 0.1%
S/N
| > 85 dB
Channel Separation|
>50 dB
Frequency Response
| 50Hz – 15KHz
Sensitivity|
> 400mv
Speaker Wires
| 4.6′
Volume Control Wire|
6.2′
Audio Input Cable
| 1.9′
Power Cable|
6.2′
Clamp Size Range
| 0.75″ -1.25″
Fuse Rating|
7.5A
Amplifier dimensions
|
3.6″x2.3″x1.5
Installation
- Screw the clamps to the bottom of the speakers.
- Find a safe, ideal mounting location and fit the clamps over the chosen mounting bars.
- Fasten the mounting screws after you review the safety of the mounting location.
Wiring
-
Be sure to run the wiring securely and far away from any
moving components. -
Connecting the power cable to the power source: You will need to connect the 12V red wire to a (fused 7.5 A) switched power source.
-
Use the 3.5mm stereo jack to connect to your entertainment source(MP3 player, etc).
-
Use your player device and wired remote volume controller to control your level of loudness.
Bluetooth
To pair and connect your Bluetooth device to the MC720B Enter Settings > Bluetooth Menu > Search > “Boss Audio MC720B” >If Prompted to enter a passcode enter : “0000”.
Connections
Note:
- AUX 3.5 female input connector for output of other audio device like mobile phone, MP3, Ipod and so on.
- Should use standard 3.5mm 3-pole male plug AUX cable (not included).
- Stop BT connection first when using the 3.5mm AUX input as an audio source input.
Amplifier and Loudspeaker Mounting Installation Reminder
The components and wiring should not be installed around any moving parts,
keep away from ignition parts, fuel lines, or any hot exhaust.
Speakers should not be installed where they might inhibit safety features on
the vehicle (i.e. lights, horns, brake levers, etc…).
Power Supply Connection
-
Option A
Connected to Battery through a 12 VDC SPOT Relay (Single Pole Double Throw) NOT INCLUDED, SOLD SEPARATELY.
-
Option B
Connected to Battery through a Waterproof Switch (250V AC/6A) NOT INCLUDED, SOLD SEPARATELY.
Boss Audio Systems
3451 Lunar Court – Oxand, CA 93030
www.bossaudio.com
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>