Xiaomi Aqara Vibration Sensor User Guide
- June 7, 2024
- Xiaomi
Table of Contents
Vibration Sensor
Quick Start Guide
Product Introduction
Aqara Vibration Sensor is embedded with a high precision acceleration sensor and it detects the vibration and movement of objects It communicates with the Hub via Zigbee protocol. It also works with other smart accessories to set various smart scenes, such as local and remote alarms when it detects glass breaks.
- A hub is required.
- Agara Hub is required to enable Agara Vibration Sensor to work with HomeKit technology. See agara.com for more details.
- This product is for indoor use only.
Quick Setup
-
Please add the Hub to the app according to the Hub Quick Start Guide.
-
Please open the app, tap “Home” and then tap “+” in the top right corner to enter the “Add Device (Accessory)” page. Select “Vibration Sensor”, and add it according to instructions.
- If the connection fails, please move the accessory closer to the Hub and try again.
Installation
Effective Range Test: Single press the reset button on the accessory at your desired position. If the Hub makes voice prompts, it indicates that the accessory can communicate effectively with the Hub.
- Avoid metal surface to maximize signal strength
Option 1: Place it directly in the desired position.
Option 2: Remove the protective film, and stick it to the desired position.
- Keep the surface clean and dry.
Specifications
Model: DJT11LM
Dimensions: 36 x 36 x 9 mm (1.42 x 1.42 x 0.35 in.)
Wireless Protocol: Zigbee
Battery: CR2032
Operating Temperature: -10° — +50° C
Operating Humidity: 0 — 95% RH, no condensation
Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling
Road, Liuxian Ave, Taoyuan Residential District, Nanshan
District, Shenzhen, China.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>