JVC Soft Wireless Earbud with Stayfit Tips-Complete Features/Instruction Guide
- June 4, 2024
- JVC
Table of Contents
JVC Soft Wireless Earbud with Stayfit Tips
Specifications
- STANDARD : BLUETOOTH v4.2
- FREQUENCY RANGE : 2.402 GHz – 2.480 GHz
- OUTPUT POWER : +4 dBm (MAX), Power Class 2
- MAX. COMMUNICATION DISTANCE : Approx. 10 m (33 ft) ※
- PROFILES : A2DP/AVRCP/HFP/HSP
- CODECS : SBC
- TRANSMISSION BANDWIDTH : 20 Hz – 20,000 Hz
- SUPPORTED CONTENT PROTECTION : SCMS-T
- HEADPHONE TYPE
- TYPE : Dynamic type
- FREQUENCY RESPONSE : 20 Hz – 20,000 Hz
- POWER SUPPLY/GENERAL
- POWER SUPPLY : Internal rechargeable lithium battery
- BATTERY LIFE : Approx. 4.5 hours (Depends on usage conditions.)
- CHARGING TIME : Approx. 2.5 hours
- USAGE TEMPERATURE RANGE : 5 °C (41 °F) to 40 °C (104 °F)
- CHARGING TEMPERATURE RANGE : 5 °C (41 °F) to 40 °C (104 °F)
- MASS : approx. 12 g (0.42 oz) (including internal rechargeable battery)
- ACCESSORIES : Charging cable, Earpiece S and M sizes (2 each)
Introduction
Using the 3-button remote and microphone, you can take calls, adjust the volume, play and pause music, and cycle tracks. works with Android and iOS mobile devices. Use wireless! You can listen to and enjoy your music longer thanks to the built-in 5-hour rechargeable battery. Choose from 6 colorful, lively options! A soft elastomer body provides a secure, cosy fit.
CHARGING
Connect the System to a USB conversion adapter or a computer while the computer is turned on using the charging cord that is included.
-
Open the cover.
-
To begin charging, connect the included charging wire.
-
To begin charging, place the USB AC adapter into the AC outlet.
-
Charging begins as soon as the red signal turns on.
-
It takes approximately 2.5 hours to charge. The indicator turns off once the charge is finished.
PAIRING
-
Verify that the indication is not still on.
-
Hold down the POWER button while the indicator rapidly and alternately flashes red and blue.
- Once you’ve made sure the indicator is alternately and fast flashing red and blue, let go of your finger.
-
the Bluetooth device’s Bluetooth feature should be enabled.
-
Choose “JVC HA-FX9BT” from the available devices.
- When a connection is established, the indicator steadily glows blue.
RECONNECT (POWER ON)
-
Verify that the indication is not still on.
-
Press and hold the POWER button on the System until the indicator lights up in blue for one second, then turn on the Bluetooth setting on the Bluetooth device.
-
After the system’s indication becomes blue, let go of your finger.
-
The prior Bluetooth device is then automatically tried to reconnect by the system. If a connection is made, the blue indicator keeps steadily flashing.
AUDIO OPERATION
WEARING
-
The left and right headphones should be noted. (The left (L) side) has a raised bump that resembles a semicircle.)
-
When purchased, the medium-sized silicone ear pieces are already attached.
-
The wrong earpiece size might cause bass loss and sound leakage.
-
Select the best-fitting S (small) or M (medium) earpieces for your ears in order to experience high-quality sound.
-
Verify that the earpiece is properly secured as indicated in the illustration.
-
If the earpiece is not firmly fastened, it could come loose while you are using it and stay in your ear. Avoid pushing the earpiece even deeper into your ear if it is still there.
LISTENING TO MUSIC
To begin playback, open the music player app on the Bluetooth device that
is connected.
OPERATING THE REMOTE CONTROL
PLAY/PAUSE
immediately press the POWER button once.
VOLUME ADJUSTMENT
- Minus Icon/Plus Icon button swiftly pressed once.
- To continually modify the volume, press and hold the button.
- the start of the current track, the start of the previous track, or the start of the following track
- During playback, swiftly press the Minus Icon/Plus Icon button twice.
PHONE OPERATION
OPERATING THE REMOTE CONTROL
TAKE THE CALL.
When you receive a call, swiftly press the POWER button once.
CALLING THE CALL OFF
While on the call, swiftly press the POWER button once.
IGNORING A CALL
When you get the call, swiftly press the POWER button twice.
SWITCHING BETWEEN THE PHONE AND HEADPHONES DURING THE CALL
Throughout the call, swiftly press the POWER button twice.
When not using the phone feature, swiftly press the POWER button twice to activate the voice assistant (Siri, etc.).
POWER OFF
For roughly 3 seconds, keep the POWER button depressed.
- One second of red illumination on the indicator is followed by the power being turned off.
TROUBLESHOOTING
Frequently Asked Questions
How can JVC wireless headphones tell when they are charged?****
While charging, the earphones’ red indicator illuminates and the white indicators on the charging case flash or light up. The earbuds’ and charging case’s indicators will go out once charging is finished. The earphones take around 2 hours to charge.
How does the JVC earphones’ volume control work?****
Press the R earphone button twice fast to increase the volume. Press the L earphone button twice fast to reduce the volume.
How do JVC earbuds work to answer a call?****
I take the call. When you get a call, immediately press the button once. Calling the call off During the call, swiftly press the button once. ignoring a call When an incoming call comes in, hold the button down continuously for approximately a second or so until you hear a beep. When you hear the beep, let go of your finger.
Why are the red flashes on my JVC headphones?****
The System and the BLUETOOTH device are not connected when the light remains slowly blinking red. To connect, choose System on the Bluetooth device in this scenario.
Why won’t my JVC headphones pair with Bluetooth?****
Make sure the Bluetooth device is within one meter of the system when pairing. On the Bluetooth device, turn pairing on. Reset pairing by erasing the pairing data from the Bluetooth device list. After turning the connected device’s Bluetooth feature off and back on, perform operations.
How do I hook up my iPhone to my wireless JVC earbuds?****
Hold down the button for three seconds or until the red and blue flashes on the indicator alternate. Hold down the button for 7 seconds or until the red and blue flashes on the indicator alternate. 3 the Bluetooth device’s Bluetooth feature should be enabled. 4 Choose “JVC HA-EC20BT” from the available devices.
How can I tell whether my earbuds have enough power?****
Examine the earphones’ battery indicator light to see how they are doing. When the earbuds are inserted, the case and earbuds will both charge at the same time. The case can be charged independently of the earbuds. Charged in red. Fully charged in green.
How long does it take a JVC earbud to charge?****
They take an hour or less to fully recharge after I use mine for 6-7 hours. Once they are fully charged, the little led next to the play button goes off.
I have wireless earphones; how do I know if they are charging?****
When the case is fully charged, a light will appear to let you know that it is time to put your earbuds in the case so they can begin charging. You may charge earbuds using a USB connection; simply connect to charge.
How do I raise the volume on my earbuds?****
Go to settings on your Android device and choose the sound option. The different sound settings will be visible. To change the media setting, click on it and make the necessary adjustments. You can do this while listening to music because it will direct you to the right settings.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>