Vive RHB1006BLK Tens Unit Muscle Stimulator Owner’s Manual

Vive RHB1006BLK Tens Unit Muscle Stimulator

WHAT’S INCLUDED

• lx TENS Unit
• 2x Input cables
• 8x Electrodes
  • 4x Square Electrodes,
  • 2x Circular Electrodes,
  • 2x Rectangular Electrodes)
• lx USB Wall Outlet Adaptor (D lx Mini-USB Charging Cable

OVERVIEW

Your Vive 8-Mode TENS Unit is a back and muscle pain treatment that uses electrical pulses to contract muscles for a deep massaging effect. We are constantly answering questions and recording helpful videos to make using your Vive 8-Mode TENS Unit as easy as possible. Check out the included links and QR codes to help you through the process.

To see all of the FAQs in one place vhealth.link/a0365

FIRST USE INSTRUCTIONS

To see a video demonstration, check out vhealth.link/elalb

1. Before you can begin using your TENS Unit, it must be charged. Insert the Mini-USB Charging Cable into the Mini-USB port, and connect the other end to a USB port or use the included USB Wall outlet Adapter. Let the Unit charge until the battery life indicator is full. This may take 2-3 hours.

2. Connect desired Electrodes to the Leads. For first use, use the four (4) Square Electrodes. You can change them later if desired.

3. Connect one set of Leads to the A Output and the other to the B Output, as needed. It is not required to use both outputs. However, you must use all of the connected outputs or the Unit will not operate.

4. Make sure that the skin around the treatment area is clean and free of lotions and oils, and apply the Electrodes according to the examples shown on the Pad Position Chart.
   NOTE: The Unit will not operate unless all connected Electrodes are attached to your skin.

5. Slide the ON/OFF switch to the ON position. The Unit screen will turn out, ready to receive input.

6. To select a mode, press the M button to scroll through the options in pairs until coming to the desired mode block. If the mode desired is not selected (flashing), press the button to toggle between the two (2) modes within that block.

7. Beginning at the lowest intensity setting, press the◊ button to increase the intensity to the first level. The TENS Unit will begin operating using the A Output Electrodes at the selected mode and intensity for twenty
   (20) minutes before stopping.

8. Press the A B button once to select the B Output, and press the button to increase the intensity there to the first level. The TENS Unit will begin operating using the B Output Electrodes as well at the selected mode and intensity ..

9. You can continue to adjust the intensity of each Output by pressing A B button to select the desired Output and the and buttons to adjust the intensity level.

10. Press the button to stop the electrotherapy from both Outputs at any time.

11. To adjust the length of the timer setting (shown in the upper left corner of the display), press and hold the button. The time setting will cycle through each option from ten (10) to sixty (60) minutes. Release the button once the desired time is displayed. Most physicians recommend a treatment length of twenty (20) minutes.

12. Once the cycle time is complete, the Unit will automatically turn off. Press the button to begin another treatment.

13. To lock the Unit during treatment and prevent interruption, press and hold the A B button. The lock icon will appear at the top of the display. Repeat this step to unlock it.

TENS UNIT CONTROLS

The default time is set at twenty (20)

minute s. This can be adjusted using the

0 butt on.

Battery Indicator| Shows the current battery life.
Massage Modes| Shows all of the different massage mode options in eight (B) blocks. Each block shows two (2) possible modes for a total of sixteen

(16) Potential mode options:

1- 2: Massage

3- 4: Beating

5- 6: Cupping

ON/OFF Switch| 7- 8: Thai massage

9-10: Acupuncture

11- 12: Scraping

13- 14: Tuina

15-16: Relaxing

The number of each mode will flash to indicate that it is selected. When selected, the mode icons will animate to demonstrate the selected message.

These are selected using the

M button.

---|---
Output A Intensity Indicator| Shows the current selected intensity level for Output A, from 0- 20. The letter on the indicator flashes to show that it is currently selected

for adjustment.

Output B Intensity Indicator| Shows the current selected intensity level for Output B, from 0- 20. The letter on the indicator flashes to show that it is currently selected

for adjustment.

9= and

Buttons

| Increases and decreases the

the intensity level of the currently selected Output from 0- 20.

0 Button| When pressed, toggles between selecting the two

(2) massage mode options in the currently selected block. These are simply different variations of the selected massage; choose the one that feels

most comfortable.

When held, adjust the length of the Massage Timer from ten (10) to sixty (60) minutes in ten (10) minute increments. Release the

0  button once the desired

time is displayed. Most physicians recommend a treatment length of twenty

(20) minutes.

A      B Button| When pressed, toggles between selecting the intensity levels for Output A and Output B for adjustment.

When held, lock and unlock the Unit to prevent/ allow setting changes during operation.

---|---
An Output Port| Insert the Leads for Electrodes A here.
B Output Port| Insert the Leads for Electrodes B here.

PAD POSITION CHART

NOTE: Never place an Electrode across the chest area as this may cause lethal heart rhythm problems or interfere with the healing of a wound. Never place an Electrode on your head, mouth or other sensitive areas.

• Output A
• Output B

MAINTENANCE

• The only maintenance required for your TENS Unit is to clean it occasionally with a soft cloth. Do not use any abrasive or volatile cleaners.
• If the Electrodes fail to stick, throw them away. Replacements can be purchased at www.vivehealth.com.
• Don’t attempt to open or repair the device by yourself. Please report to vivehealth.com if any unexpected operations or events occur.

TROUBLESHOOTING

If the Unit isn’t operating like you think it should, check here before contacting service@vivehealth.com.

If the Unit doesn’t turn on

• Recharge the battery using the Mini-USB Charging Cable and Wall Adapter. Allow the Unit to charge for two (2) to three (3) hours. NOTE: When fully charged, the Unit should last between five (5) and six (6) days for about thirty (30) minutes per day. It will lose its charge faster with  increased usage.

If there is no electrotherapy coming from the Electrodes

• Ensure that the Electrodes are properly connected to the Leads and properly attached to the skin. Electrotherapy will not begin if the pads are not properly connected.

WARNINGS

• Never use the TENS Unit if you have an implanted defibrillator or any other implanted metallic device. Use could cause burns, electrical interference, electric shock or death.
• Please consult with a physician before using the TENS Unit if diagnosed with any of the following health conditions
  • Abnormal blood pressure
  • Abnormal skin condition
  • Acute disease
  • Any condition currently being actively monitored by your physician
  • Heart disease
  • High fever
  • Infectious disease
  • Lack of skin sensation
  • Malignant tumor
  • Pregnant
• Consult your physician before using the TENS Unit if the user has ever been diagnosed with epilepsy.
• Do not use the Unit under any of the following conditions:
  • If you experience discomfort, dizziness, nausea or pain during use (Please consult with your physician.)
  • It uses other electronic monitoring equipment such as cardiac monitors or ECG alarms
  • While operating other types of machinery or any other activities that could cause injury
  • While in the bath or shower
• Never place the electrodes across the chest area as this may cause lethal heart rhythm problems or interfere with healing of a wound
• Never store the Unit in areas of extremely numidity or temperatures or places that are exposed to direct sunlight.
• Keep the TENS Unit stored in a place out of reach of children. The Unit is not intended for use on children.
• Never move the Electrodes while the Unit is in operation.
• Never use the Unit on blemished skin patches, open wounds or rashes.
• Never use this device on your head, mouth, or other sensitive areas.
• The TENS Units is not intended to replace other pain management therapies or pain medication.
• The TENS Units is not an effective form of treatment for central pain originating from the back of the neck.
• Exercise caution if the user has a history of internal bleeding or recently experienced a fracture or injury.
• Exercise caution if applying Electrodes over the uterus while menstruating.
• Exercise caution if applying Electrodes over areas of skin with lower sensation of feeling.
• Stop using the Unit if treatment fails to provide pain relief.
• User could potentially experience skin irritation or burns as a reaction to electrical stimulation.
• Portable and mobile radio frequency communication equipment can also affect the TENS Unit.
• Never attempt to disassemble or repair the TENS Unit.

SPECIFICATIONS

• Power Supply: DC 3.7V
• Output Voltage: 80V @ 50000
• Pulse width: lO0uS
• Frequency: l-200Hz
• Timer: 10-60 minutes (Default setting is twenty (20) minutes)
• Intensity Levels: 20 levels
• Charger: 110-120V, 50/60Hz: DC 5V, 300mA (output)

WARNING: No modification of this equipment from its original specifications is allowed.

ENVIRONMENTAL CONDITIONS

For normal operation, transport and storage:

• Normal working ambient temperature: 5- 40°C
• Normal working ambient humidity: 15%-90% RH
• Store and transport ambient temperature: – 20-75°C
• Store and transport ambient humidity: 0%-90% RH
• Atmospheric pressure: 70-l06kPa

WARRANTY INFO

1 YEAR GUARANTEE You are protected by Vive Health’s industry-leading guarantee and customer service.

GOT MORE QUESTIONS?

Check out our list of Frequently Asked Questions at vhealth.link/a0365 for helpful answers.

And if that doesn’t answer your question, our customer service team would love to help! Feel free to connect with them by phone, e-mail, or chat on our website.

• service@vivehealth.com
• l-800-487-3808
• vivehealth.com

Distributed by vive health 8955 Fontana Del Sol Way Naples, FL 34109

FREQUENTLY ASKED QUESTIONS

What is the primary use of the Vive RHB1006BLK TENS Unit Muscle Stimulator?

The primary use of the Vive RHB1006BLK TENS Unit Muscle Stimulator is to provide pain relief through electrical nerve stimulation, particularly useful for chronic and acute pain.

How many stimulation modes does the Vive RHB1006BLK have?

The Vive RHB1006BLK TENS Unit features multiple stimulation modes designed to cater to different pain relief needs and preferences.

Can I adjust the intensity of the Vive RHB1006BLK stimulation?

Yes, the intensity of the Vive RHB1006BLK TENS Unit Muscle Stimulator can be adjusted to various levels to suit your comfort and therapeutic needs.

Is the Vive RHB1006BLK TENS Unit portable?

Yes, the Vive RHB1006BLK TENS Unit is portable, allowing users to carry and use it both at home and on the go.

What kind of power source does the Vive RHB1006BLK use?

The Vive RHB1006BLK TENS Unit Muscle Stimulator typically uses batteries, making it convenient for use without constant access to a power outlet.

Are there any safety features in the Vive RHB1006BLK TENS Unit?

The Vive RHB1006BLK includes safety features like an automatic shut-off timer to prevent overuse and ensure safe operation.

Can the Vive RHB1006BLK be used on any part of the body?

The Vive RHB1006BLK TENS Unit can be used on various body parts where pain relief is needed, such as the back, neck, legs, and arms. Always follow the guidelines provided for safe application.

How do I maintain the electrode pads of the Vive RHB1006BLK?

To maintain the electrode pads of the Vive RHB1006BLK, keep them clean and free of oil or dirt. Replace them according to the manufacturer's instructions when they lose their stickiness.

What should I do if the Vive RHB1006BLK TENS Unit stops working?

If the Vive RHB1006BLK stops working, check the batteries and connections first.

Is the Vive RHB1006BLK TENS Unit suitable for all age groups?

The Vive RHB1006BLK is generally suitable for adults. It is advisable for elderly users or those with certain medical conditions to consult a healthcare provider before use.

Can I use the Vive RHB1006BLK while sleeping?

It is not recommended to use the Vive RHB1006BLK TENS Unit while sleeping due to the risk of prolonged exposure and potential skin irritation.

What is the battery life like on the Vive RHB1006BLK?

Battery life for the Vive RHB1006BLK depends on usage patterns and settings. Regularly replace or recharge batteries as needed to ensure optimal performance.

How many electrode pads come with the Vive RHB1006BLK?

The number of electrode pads included with the Vive RHB1006BLK TENS Unit can vary, so check the product specifications or contents listed in the packaging.

Can I travel with the Vive RHB1006BLK TENS Unit on an airplane?

Yes, you can travel with the Vive RHB1006BLK TENS Unit on an airplane. However, it’s advisable to check with the airline regarding any specific regulations pertaining to medical devices.

Can the Vive RHB1006BLK be used for muscle strengthening?

The Vive RHB1006BLK is primarily designed for pain relief, though some TENS units can also provide muscle stimulation benefits. Check the device’s capabilities for specific EMS (Electrical Muscle Stimulation) features.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: Vive RHB1006BLK Tens Unit Muscle Stimulator Owner’s Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>