Y-Desks Electric Height Adjustable Desk Frame Instruction Manual
- June 3, 2024
- Y-Desks
Table of Contents
Y-Desks Electric Height Adjustable Desk Frame
Y-Desk Electric Height adjustable desk frame
Electric Control Part:
- Input Voltage: 100-240V can be use
- Output Voltage: 29V DC 1.8A
- Duty cycle: 10%MAX 2min on 18 min off
- Switch power supply,low energy consumtion
- Manual device can move and long press
Desk frame part:
- built-in limit switch
- Dynamic load: 80KG
- The maximum static load: 100KG
- Load speed: 30mm/s
Safety and warnings
This appliance can be used by children aged from 8 years and above and persons
with reduced physical,sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.Children shall
not play with the appliance.Cleaning and user maintenance shall not be made by
children without supervision.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal ,recycle it responsibly to promote the sustainable reuse of material resources.To return your used device,please use the ruturn and collection systems or contact the retailer where the procuct was purchased.They can take this product for environmental safe recycling.
Installation instruction
Handset Instruction
The whole handset surface is a button panel. If there is no press within 30 seconds, the screen is locked and M1/M2/M3/M4 keys are locked correspondingly, you should press Up or Down key first, it can be used when the display screen light up.
-
Up or Down Key
To adjust the height of the desk, keep pressing on “up” or “down” until it fits your best position. -
Display screen
Display the height value of the desk. -
Memory Key (M1/ M2/ M3/ M4)
After setting memory keys, the desk can lift automatically to memory height. -
How to set memory mode
Please keep pressing M1/M2/M3/M4 key for 5 seconds, until “be” sound, the memory height is successfully saved. Then press M1/M2/M3/M4, the desk moves to memory height automatically. -
Safety function
When the desktop is on the rise or down, encountered reverse resistance, the desk will rebound. -
The handset shows error code and solution
Documents / Resources
|
Y-Desks Electric Height Adjustable Desk
Frame
[pdf] Instruction Manual
Electric Height Adjustable Desk Frame, Electric Desk Frame, Height Adjustable
Desk Frame, Adjustable Desk Frame, Desk Frame, Frame, Desk
---|---
|
Y-Desks Electric Height Adjustable Desk
Frame
[pdf] Instruction Manual
Electric Height Adjustable Desk Frame, Electric Desk Frame, Height Adjustable
Desk Frame, Desk Frame, Desk, Frame
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>