vive LVA1022 Overbed Table Owner’s Manual
- June 7, 2024
- Vive
Table of Contents
OVERBED TABLE
Owner’s Manual
LVA1022
OVERVIEW
We are constantly answering questions and recording helpful videos to make using your Vive Overbed Table as easy as possible. Throughout the manual we will include QR codes and links to important videos that you can visit to help you through the process.
To see all FAQ’s in one place
visit vhealthilink/g18
HARDWARE INCLUDED
1. 6x Spring Washers
2. 6x Washers
3. 6x Screws
4. Bolt plate
5. 2x Bolts
TABLE PARTS INCLUDED
6. Table top
7. Column assembly (includes trip rod)
8. Base
9. Wheels with lock (2 each)
10. Wheels without lock (2 each)
ASSEMBLY INSTRUCTIONS
Want to watch us do this? Check out
vhealth.Iink/7ri for an easy instructional video.
Step 1:
Open the box and remove all of the parts. Verify all parts and hardware are
present.
Step 2:
Fit each Screw (#3) through a Flat Washer (#2), a Spring Washer (#1), the
Column Assembly (#7), and finally into the underside of the Table Top (#6).
Step 3:
Place the bolt plate (#4) on top of the base (#8).
Step 4:
Align the holes in the base (#8) with the bottom of the column (#7). Install
the 2 bolts (#5) and tighten. The base must be installed in the same direction
of the table top.
Step 5:
Remove the black screw in the column marked for removal.
Do not remove the silver screw.
Step 6:
Install each wheel into the holes in the base (#8). Push them in as far as the
top. The non-locking wheels (#10) should be installed in the base furthest
from the column while the locking wheels (#9) should be closest to the column.
OPERATING INSTRUCTIONS
Step 1:
To lock the wheels, step down on the wheel locking levers. To increase the
height of the table, gently pull up on the table top.
Step 2:
To adjust the tabletop height, lift the trip lever and push or pull the
platform to the desired level.
WARNING
- Please follow all instructions and warnings to avoid hazardous situations that can result in property damage, injury and/or death.
- Please follow all instructions and warnings to avoid hazardous situations that can result in property damage, injury and/or death.
- Inspect the overbed table for damage or loose hardware before each use. Do not use the table if it is damaged or unstable.
- Do not modify the table in any way.
- Only use the overbed table for its intended use.
- The overbed table is not designed to hold electrical items such as televisions and computers or to be used near an open flame or excessive heat.
- The overbed table is designed for indoor use only.
- The maximum weight limitation for this table is 50 pounds (22 kg.).
- Keep any weight on the overbed table evenly distributed over the surface. Do not overload the table.More than 50 pounds on the table could result in breakage, as well as damage to property and/or serious injury.
- The overbed table should not be used as a sleep surface; as a walker or mobility aid, to prevent or brace a person’s fall; or to help transport persons or items.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>