XTREME XHX1-1007-BLK IR Remote Control Extender Kit User Manual
- June 7, 2024
- Xtreme
Table of Contents
REMOTE CONTROL EXTENDER
EXTEND THE REACH OF YOUR REMOTE CONTROLS
MANUAL
855-999-8041
www.XtremeCables.com
IR Remote Control Extender Kit
Introduction
Thank you for purchasing IR Remote Control Extender Kit. The IR Remote Control Extender Kit is a system that repeats the signal of your audio/video device remote control. You can have your audio/video equipment in a closed closet and use this system to connect to the equipment, so you may be able to use your remote control(s) outside of the closed space. This system has three parts. The IR Reciever can be mounted in a central location and it receives the IR signal from your remote controls (it includes a USB cable, a 2.5mm female jack cable, and a 3.5mm female jack cable). Both the 2.5mm male jack and the 3.5mm male jack IR Emitters connect to your audio/video device to receive the signal. This IR Remote Control Extender Kit is a wide frequency of 20-60KHz, which means it will work with most IR devices. It can be powered by the included 5V USB adapter.
Features
- Extend IR for concealed audio/video devices
- Wide frequency 20-60KHz, compatible with various IR remote control devices.
- Long cable length, 26ft. (8 meters) between IR receiver and IR emitter buds.
- Powered by USB, convenient for getting power.
- Operate four IR controlled audio/video devices
Connection Instructions
Specifications
| IR Frequency Range | 20KHz to 60KHz |
|---|---|
| Range of IR receiver | 22ft. |
| Range of IR emitter | 3ft. |
| Power | DC5V1A |
| Length of IR Receiver Cable (USB cable) | 3ft. |
| (2.5mm female jack cable) | 22ft. |
| (3.5mm female jack cable) | 22ft. |
| Length of IR Emitter Cable (2.5mm male jack cable) (3.5mm male jack cable) |
3ft.
3ft.
Connector
(IR receiver cable)
(IR emitter cable)| USB x 1, 2.5mm(F) x 1, 3.5mm(F) x 1 USB x 1, 2.5mm(M) x 1,
3.5mm(M) x 1
ONE YEAR WARRANTY
Xtreme warrants its products for ONE YEAR against defects in manufacturing
under regular consumer use with the original receipt of retail purchase.
We believe in our products and want to provide you with a replacement if
needed, but we have to know about the problem while the product is still under
warranty. If you discover a defect covered by this warranty, please contact us
about receiving a replacement. In order to use the product’s warranty, the
customer must provide proof of the retailer’s receipt.
*Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect.
Xtreme’s warranty is limited to our products only. Our warranty does
not cover the replacement or repair cost of any third-party accessory,
electronic device, or personal property.
For instructions about how to obtain warranty service for your product,
please contact Customer Service at
customerservice@xtremecables.com
Package Contents:
USB IR receiver cable x 1
2.5mm jack dual head IR emitter x 1
3.5mm jack dual head IR emitter x1
USB power adapter (5V1A) x 1
User manual x 1
Important Safety Information
- Do not plug the unit in any outlet that does not have enough current to allow the device to function. The required specification of the USB adapter is 5V1 A. Refer to the specifications in this manual for the power level of the unit.
- Liquid: If this unit or its corresponding power adapter has liquid spilled on it, do not attempt to use the unit.
- Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product. In case of a storm, it is recommended that you unplug this device from the outlet.
- Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts. THERE ARE NO USER-SERVICEABLE PARTS. Do not attempt to open this product and expose the internal circuitry.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>