XTREME AERO BUDS II User Guide
- June 7, 2024
- Xtreme
Table of Contents
AERO BUDS II
TRUE WIRELESS
QUICK START GUIDE
855-999-8041 | www.xtremecables.com
Package Contents
Bluetooth® Earbuds
Charging Case
Charging Cable
Manual
GETTING STARTED
- Micro USB Charging Port
- Charging Case LED Indicators
- Charging Case Power Button
LLeft Earbud
Pause/Play/End Call, Previous Track
| 4. Right Earbud LED Indicator
5. Right Control Button
6. Left Earbud LED Indicator
7. Left Control Button
R Right Earbud
Pause/Play/Answer Call, Next Track
---|---
CHARGING YOUR CASE
-
Charge on the go charging case, with the included micro USB cable for 2-3 hours. (LED (2A) will blink red).
Do not charge longer than the suggested time. Do not charge overnight. -
When LED (2A) is illuminated solid red battery case is fully charged.
2A Flashing RED: Battery Case is charging
Solid RED: Battery Case is fully charged
2B Solid BLUE: Battery Case is charging earbuds
OFF: Battery Case is off
CHARGING YOUR EARBUDS
- Place Right and Left Earbuds in battery case charging cradle and press the power button on the battery case (3).
- Charging case LED indicator (2B) will illuminate Blue and the earbud LED indicators (4, 6) will illuminate Red, indicating that the earbuds are charging properly. When Earbuds LEDs (4, 6) turn solid blue, earbud batteries are fully charged.
- After earbuds are fully charged, press the charging case power button (3) to turn the charging case OFF.
MONO MODE (SINGLE EARBUD USE)
- Remove earbud from the charging cradle and power on by pressing the control button (7). Or (5) for 3 seconds depending on which earbud you using.
- Once the earbud is powered on, proceed to pair.
STEREO MODE (DUAL EARBUD USE)
-
Remove both earbuds from the charging cradle and place them in your ears.
-
Make sure Bluetooth® Search Mode is turned off on your mobile device.
-
Hold the right earbud button (7) for 3 seconds and then press left earbud button (9) for 3 seconds until they are powered on.
(Earbud LEDs will flash Red and Blue to indicate that they are in Link mode) -
Earbuds will automatically link together after a few seconds, and earbuds will alert “connected”. (LEDs will flash blue)
-
Once Earbuds are linked together you may proceed to pairing with your mobile device.
PAIRING
- Enable Bluetooth® search mode on your mobile device and search for pairing name “AERO 2” and select it on your mobile phone. Once the earbuds are successfully paired a notification will sound “connected.”
- Now you can enjoy your true wireless Bluetooth® Earbuds.
*Note: Once earbuds have been initially paired successfully with your mobile device they will automatically pair the next time they are powered on.
OPERATING BLUETOOTH® EARBUDS
| FUNCTION | OPERATION |
|---|---|
| Power On | Press (5) or (7) for 3 seconds |
| Power Off | Press (5) or (7) for 5 seconds |
| Play/Pause | Single press (5) or (7) |
| Answer/Reject | Answer (7) or Reject (5) |
| EARBUDS | LED INDICATIONS (4) & (6) |
| Power On | Red and blue LED will flash 1 second |
| Link Mode | Flashing Blue & Red |
| Paired Successfully | Flashing Blue |
| Low Battery | Flashing Red |
| Power Off | LED Off |
EARBUDS IN CRADLE
Charging S| Solid
Fully Charged| Solid Blue
CHARGING CASE| See CHARGING YOUR CASE