XTREME PCA2-1013 Studio Web Camera for Video Calls User Guide
- June 7, 2024
- Xtreme
Table of Contents
WEB CAMERA
FOR VIDEO CALLS AND SOCIAL MEDIA RECORDING
MANUAL
GETTING STARTED
- Camera Lens
- LEO Lights
- Microphone
- 4ft USB Cord W/LED Brightness Control
- Adjustable Neck
The Xtreme Studio Web Camera is compatible with Windows Operating System only.
No drivers are required for installation. Simply plug the USB cord from the
web camera into your PC. Then plug the 3.5mm microphone audio cable from the
web camera into the microphone input on the PC
(Note: If a microphone is already present on your PC, this will not be
required).
You are now ready to use your Studio Web Camera with third-party software like
Skype, Microsoft Teams, Zoom, and more.
MOUNTING YOUR WEB CAMERA
- Open the web camera stabilizer to a proper angle.
- Place web camera on your computer monitor using the web camera stabilizer.
ADJUSTING LED BRIGHTNESS
To adjust the web camera LED brightness, locate the LED brightness control wheel on the USB Cable, and slide the wheel up and down to raise or lower the brightness.
PRODUCT PARAMETERS
| Sensor | – HD Color OV 0308 CMOS Sensor |
|---|---|
| Lens | 4P 2M Lens F2.8 |
| Video Recording | AVI, CFI Mode |
| Frame Rate | 30 FIS |
| Interface | USB 2.0 & USB 1.1 Compatible |
| Power Supply | 5V (USB Port) |
| Low Light Compagination | High Light LED (x3) |
| Microphone | Integrated USB Mic (10m Range) |
| Suggested Resolution | 640p X 480p |
| Static Picture Storage Format | BMPI JPG |
| Dynamic Picture Storage Format | _ AVI |
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
ONE YEAR WARRANTY
Xtreme warrants its products for one year against defects in manufacturing
under regular consumer use with the original receipt of retail purchase.
We believe in our products and want to provide you with a replacement if
needed, but we have to know about the problem while the product is still under
warranty. If you discover a defect covered by this warranty, please contact us
about receiving a replacement In order to use the product’s warranty the
customer must provide proof of the retailer’s receipt.
Any customers outside of the U.S. will be responsible for shipping and
handling charges if a replacement is required that is not due to a
manufacturing defect. If there is not a manufacturing defect, shipping and
handling will be applied.
Xtreme’s warranty is limited to our products only. Our warranty does not cover
the replacement or repair cost of any third-party accessory, electronic
device, or personal property.
For instructions about how to obtain warranty service for your product, please
contact Customer Service via email at customerservice @
xtremecables.com
WHAT’S INSIDE
Standard Definition Web Camera w/LED Control
Cable Manager
Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>